|
|
|
|
|
|
Northern Industrial Mini Drill Press - 5-Speed, 1/3 HP |
- Motor: 3/4 HP, 110-Volt, 1,725 RPMBench mount drill press with 16 speeds ranging from 200 to 3,630 RPMThreaded depth lock
- Overall height: 38-InchCrank-operated, rotating worktable tilts up to 45-Degree; full 10-by-13-Inch work surfaceScrewdriver handle
- Spindle travel: 3-1/4-Inch3/4 HP 115/230-Volt motor; 15-Inch swing; adjustable tension spindle return spring11 5/8in. x 7 1/3in. base
- Swing: 13-1/4-InchIncludes 5/8-Inch drill chuck and key; built-in work-light (bulb not included)
- Drill chuck: 5/8-InchMeasures 31-by-13-by-39-1/2-Inch (Length by Weight by Height); weighs 150-Pound
Check price and buy Northern Industrial Mini Drill Press - 5-Speed, 1/3 HP at Amazon.com |
|
|
|
DELTA DP350 Shopmaster 1/3HP 12-Inch Bench Drill Press |
- Motor: 3/4 HP, 110-Volt, 1,725 RPMBench mount drill press with 16 speeds ranging from 200 to 3,630 RPMThreaded depth lockPowerful 1/3 HP motor with variable speed capabilities of 500-3,100 RPM
- Overall height: 38-InchCrank-operated, rotating worktable tilts up to 45-Degree; full 10-by-13-Inch work surfaceScrewdriver handleSturdy tab
- Spindle travel: 3-1/4-Inch3/4 HP 115/230-Volt motor; 15-Inch swing; adjustable tension spindle return spring11 5/8in. x 7 1/3in. basele adjusts 90 degrees to the left or right; rack-and-pinion depth adjustment allows for precise drilling
- Swing: 13-1/4-InchIncludes 5/8-Inch drill chuck and key; built-in work-light (bulb not included)Super sturdy cast-iron construction virtually eliminates vibration
- Drill chuck: 5/8-InchMeasures 31-by-13-by-39-1/2-Inch (Length by Weight by Height); weighs 150-PoundMeasures 22 x 11 x 37 inches and weighs 78 pounds
- Includes 1/2-inch chuck key, belt and pulleys, and flexible lamp
Check price and buy DELTA DP350 Shopmaster 1/3HP 12-Inch Bench Drill Press at Amazon.com |
|
|
|
Sunex (SUN5000A) 16 Speed Drill Press with 3/4 HP Motor |
- Motor: 3/4 HP, 110-Volt, 1,725 RPMBench mount drill press with 16 speeds ranging from 200 to 3,630 RPMThreaded depth lockPowerful 1/3 HP motor with variable speed capabilities of 500-3,100 RPM90 day warranty on material and workmanship
- Overall height: 38-InchCrank-operated, rotating worktable tilts up to 45-Degree; full 10-by-13-Inch work surfaceScrewdriver handleSturdy tab
- Spindle travel: 3-1/4-Inch3/4 HP 115/230-Volt motor; 15-Inch swing; adjustable tension spindle return spring11 5/8in. x 7 1/3in. basele adjusts 90 degrees to the left or right; rack-and-pinion depth adjustment allows for precise drilling
- Swing: 13-1/4-InchIncludes 5/8-Inch drill chuck and key; built-in work-light (bulb not included)Super sturdy cast-iron construction virtually eliminates vibration
- Drill chuck: 5/8-InchMeasures 31-by-13-by-39-1/2-Inch (Length by Weight by Height); weighs 150-PoundMeasures 22 x 11 x 37 inches and weighs 78 pounds
- Includes 1/2-inch chuck key, belt and pulleys, and flexible lamp
Check price and buy Sunex (SUN5000A) 16 Speed Drill Press with 3/4 HP Motor at Amazon.com |
|
|
|
Northern Industrial Floor Drill Press - 16-Speed, 3/4 HP |
- Motor: 3/4 HP, 110-Volt, 1,725 RPMBench mount drill press with 16 speeds ranging from 200 to 3,630 RPMThreaded depth lockPowerful 1/3 HP motor with variable speed capabilities of 500-3,100 RPM90 day warranty on material and workmanshipDepth lock
- Overall height: 38-InchCrank-operated, rotating worktable tilts up to 45-Degree; full 10-by-13-Inch work surfaceScrewdriver handleSturdy tabScrewdriver handle
- Spindle travel: 3-1/4-Inch3/4 HP 115/230-Volt motor; 15-Inch swing; adjustable tension spindle return spring11 5/8in. x 7 1/3in. basele adjusts 90 degrees to the left or right; rack-and-pinion depth adjustment allows for precise drilling17 15/16in. x 10 5/8in. base
- Swing: 13-1/4-InchIncludes 5/8-Inch drill chuck and key; built-in work-light (bulb not included)Super sturdy cast-iron construction virtually eliminates vibration
- Drill chuck: 5/8-InchMeasures 31-by-13-by-39-1/2-Inch (Length by Weight by Height); weighs 150-PoundMeasures 22 x 11 x 37 inches and weighs 78 pounds
- Includes 1/2-inch chuck key, belt and pulleys, and flexible lamp
Check price and buy Northern Industrial Floor Drill Press - 16-Speed, 3/4 HP at Amazon.com |
|
|
|
JET Floor-Mount Drill Press - 16-Speed, 3/4 HP, Model# JDP-15MF |
- Motor: 3/4 HP, 110-Volt, 1,725 RPMBench mount drill press with 16 speeds ranging from 200 to 3,630 RPMThreaded depth lockPowerful 1/3 HP motor with variable speed capabilities of 500-3,100 RPM90 day warranty on material and workmanshipDepth lockDesigned for rapid spindle speed change
- Overall height: 38-InchCrank-operated, rotating worktable tilts up to 45-Degree; full 10-by-13-Inch work surfaceScrewdriver handleSturdy tabScrewdriver handleRotating ±45deg tilting worktable
- Spindle travel: 3-1/4-Inch3/4 HP 115/230-Volt motor; 15-Inch swing; adjustable tension spindle return spring11 5/8in. x 7 1/3in. basele adjusts 90 degrees to the left or right; rack-and-pinion depth adjustment allows for precise drilling17 15/16in. x 10 5/8in. baseQuick-release clamp on table
- Swing: 13-1/4-InchIncludes 5/8-Inch drill chuck and key; built-in work-light (bulb not included)Super sturdy cast-iron construction virtually eliminates vibration1/2in. dia. external positive depth stop
- Drill chuck: 5/8-InchMeasures 31-by-13-by-39-1/2-Inch (Length by Weight by Height); weighs 150-PoundMeasures 22 x 11 x 37 inches and weighs 78 poundsBall bearing spindle support
- Includes 1/2-inch chuck key, belt and pulleys, and flexible lamp
Check price and buy JET Floor-Mount Drill Press - 16-Speed, 3/4 HP, Model# JDP-15MF at Amazon.com |
|
|
|
Kreg DB55 Foreman 3/4 HP Semi-Automatic Pneumatic Pocket Hole Machine |
- Motor: 3/4 HP, 110-Volt, 1,725 RPMBench mount drill press with 16 speeds ranging from 200 to 3,630 RPMThreaded depth lockPowerful 1/3 HP motor with variable speed capabilities of 500-3,100 RPM90 day warranty on material and workmanshipDepth lockDesigned for rapid spindle speed changePowerful semi-automatic pneumatic pocket hole machine
- Overall height: 38-InchCrank-operated, rotating worktable tilts up to 45-Degree; full 10-by-13-Inch work surfaceScrewdriver handleSturdy tabScrewdriver handleRotating ±45deg tilting worktableLever operated; 1-second cycle time
- Spindle travel: 3-1/4-Inch3/4 HP 115/230-Volt motor; 15-Inch swing; adjustable tension spindle return spring11 5/8in. x 7 1/3in. basele adjusts 90 degrees to the left or right; rack-and-pinion depth adjustment allows for precise drilling17 15/16in. x 10 5/8in. baseQuick-release clamp on table3/4-horsepower pneumatic motor; automatic air clamping
- Swing: 13-1/4-InchIncludes 5/8-Inch drill chuck and key; built-in work-light (bulb not included)Super sturdy cast-iron construction virtually eliminates vibration1/2in. dia. external positive depth stop90-120 PSI recommended; minimum compressor capacity of 5.3 cfm at 90 PSI
- Drill chuck: 5/8-InchMeasures 31-by-13-by-39-1/2-Inch (Length by Weight by Height); weighs 150-PoundMeasures 22 x 11 x 37 inches and weighs 78 poundsBall bearing spindle supportManufacturer's limited 30-day warranty
- Includes 1/2-inch chuck key, belt and pulleys, and flexible lamp
Check price and buy Kreg DB55 Foreman 3/4 HP Semi-Automatic Pneumatic Pocket Hole Machine at Amazon.com |
|
|
|
J-720r Radial Drill Press 3hp, 230/460v |
- Motor: 3/4 HP, 110-Volt, 1,725 RPMBench mount drill press with 16 speeds ranging from 200 to 3,630 RPMThreaded depth lockPowerful 1/3 HP motor with variable speed capabilities of 500-3,100 RPM90 day warranty on material and workmanshipDepth lockDesigned for rapid spindle speed changePowerful semi-automatic pneumatic pocket hole machineThe powertrain gears and spline shafts are made of the finest quality, heat treated and ground nickel-chrome steel, giving extra strength and smoothness to high torque loads
- Overall height: 38-InchCrank-operated, rotating worktable tilts up to 45-Degree; full 10-by-13-Inch work surfaceScrewdriver handleSturdy tabScrewdriver handleRotating ±45deg tilting worktableLever operated; 1-second cycle timeThe spindle is made of finest case hardened steel, for extra strength and wear
- Spindle travel: 3-1/4-Inch3/4 HP 115/230-Volt motor; 15-Inch swing; adjustable tension spindle return spring11 5/8in. x 7 1/3in. basele adjusts 90 degrees to the left or right; rack-and-pinion depth adjustment allows for precise drilling17 15/16in. x 10 5/8in. baseQuick-release clamp on table3/4-horsepower pneumatic motor; automatic air clampingThe spindle is supported by double row taper roller and thrust ball bearings at the nose, with thrust and radial axis bearings at the top
- Swing: 13-1/4-InchIncludes 5/8-Inch drill chuck and key; built-in work-light (bulb not included)Super sturdy cast-iron construction virtually eliminates vibration1/2in. dia. external positive depth stop90-120 PSI recommended; minimum compressor capacity of 5.3 cfm at 90 PSIBuild to withstand exceptionally heavy drilling and boring loads to insure maximum accuracy
- Drill chuck: 5/8-InchMeasures 31-by-13-by-39-1/2-Inch (Length by Weight by Height); weighs 150-PoundMeasures 22 x 11 x 37 inches and weighs 78 poundsBall bearing spindle supportManufacturer's limited 30-day warrantyArm raising safety device prevents arm from dropping
- Includes 1/2-inch chuck key, belt and pulleys, and flexible lamp
Check price and buy J-720r Radial Drill Press 3hp, 230/460v at Amazon.com |
|
|
|
J-2530 15" Bench Model Drill Press 3/4hp,115v |
- Motor: 3/4 HP, 110-Volt, 1,725 RPMBench mount drill press with 16 speeds ranging from 200 to 3,630 RPMThreaded depth lockPowerful 1/3 HP motor with variable speed capabilities of 500-3,100 RPM90 day warranty on material and workmanshipDepth lockDesigned for rapid spindle speed changePowerful semi-automatic pneumatic pocket hole machineThe powertrain gears and spline shafts are made of the finest quality, heat treated and ground nickel-chrome steel, giving extra strength and smoothness to high torque loads
- Overall height: 38-InchCrank-operated, rotating worktable tilts up to 45-Degree; full 10-by-13-Inch work surfaceScrewdriver handleSturdy tabScrewdriver handleRotating ±45deg tilting worktableLever operated; 1-second cycle timeThe spindle is made of finest case hardened steel, for extra strength and wear
- Spindle travel: 3-1/4-Inch3/4 HP 115/230-Volt motor; 15-Inch swing; adjustable tension spindle return spring11 5/8in. x 7 1/3in. basele adjusts 90 degrees to the left or right; rack-and-pinion depth adjustment allows for precise drilling17 15/16in. x 10 5/8in. baseQuick-release clamp on table3/4-horsepower pneumatic motor; automatic air clampingThe spindle is supported by double row taper roller and thrust ball bearings at the nose, with thrust and radial axis bearings at the top
- Swing: 13-1/4-InchIncludes 5/8-Inch drill chuck and key; built-in work-light (bulb not included)Super sturdy cast-iron construction virtually eliminates vibration1/2in. dia. external positive depth stop90-120 PSI recommended; minimum compressor capacity of 5.3 cfm at 90 PSIBuild to withstand exceptionally heavy drilling and boring loads to insure maximum accuracy
- Drill chuck: 5/8-InchMeasures 31-by-13-by-39-1/2-Inch (Length by Weight by Height); weighs 150-PoundMeasures 22 x 11 x 37 inches and weighs 78 poundsBall bearing spindle supportManufacturer's limited 30-day warrantyArm raising safety device prevents arm from dropping
- Includes 1/2-inch chuck key, belt and pulleys, and flexible lamp
Check price and buy J-2530 15" Bench Model Drill Press 3/4hp,115v at Amazon.com |
|
|
|
