|
|
|
|
|
|
|
|
MK Diamond 159346 CX-3-Percent Walk Behind Concrete Saw |
- Used for concrete applicationsFloor saw blade diameter is a extra large 16-inch for the big jobs. One diamond blade is included with saw.14" blade capacity with a 5-5/8" depth of cutCX-3 series walk behind concrete saw is ideal for small to medium jobs that require power and portability
- Use with water when cuttingA deep 7-inch cutting depth6-1/2 hp Honda gas powered motorCX-3 saw is compact, lightweight and engineered for maneuverability and reliability
- Max depth of 2"Will use up to a 16-inch blade with a 3-5 mil thicknessAdjustable depth control and left and right cutting capabilityBuilt-in water distribution system supplies water to both sides of the blade
- Replacement bladeLarge 26 liter water tankComes with a 12" MK-CX-3 dry cutting diamond bladeDesigned for left or right mounting of blade and blade guard and hinged blade guard provides easy access for blade changes and inspection
- Maximum performanceDurable 16 HP air cooled OHV Carb approved engine with low oil shutoff and recoil start provides fast starting.One year limited warrantyFolding handle bar for compact transport
Check price and buy MK Diamond 159346 CX-3-Percent Walk Behind Concrete Saw at Amazon.com |
|
|
|
MK Diamond 157867 MK-1609H Standard 8 HP 14-Inch Walk-Behind Concrete Saw |
- Used for concrete applicationsFloor saw blade diameter is a extra large 16-inch for the big jobs. One diamond blade is included with saw.14" blade capacity with a 5-5/8" depth of cutCX-3 series walk behind concrete saw is ideal for small to medium jobs that require power and portability8 hp Honda motor
- Use with water when cuttingA deep 7-inch cutting depth6-1/2 hp Honda gas powered motorCX-3 saw is compact, lightweight and engineered for maneuverability and reliabilityOne-piece unitized box chassis
- Max depth of 2"Will use up to a 16-inch blade with a 3-5 mil thicknessAdjustable depth control and left and right cutting capabilityBuilt-in water distribution system supplies water to both sides of the blade4-5/8" depth of cut
- Replacement bladeLarge 26 liter water tankComes with a 12" MK-CX-3 dry cutting diamond bladeDesigned for left or right mounting of blade and blade guard and hinged blade guard provides easy access for blade changes and inspection3600 rpm
- Maximum performanceDurable 16 HP air cooled OHV Carb approved engine with low oil shutoff and recoil start provides fast starting.One year limited warrantyFolding handle bar for compact transportOne-year limited warranty
Check price and buy MK Diamond 157867 MK-1609H Standard 8 HP 14-Inch Walk-Behind Concrete Saw at Amazon.com |
|
|
|
Husqvarna 24HP FS524 Walk Behind Concrete Saw |
- Used for concrete applicationsFloor saw blade diameter is a extra large 16-inch for the big jobs. One diamond blade is included with saw.14" blade capacity with a 5-5/8" depth of cutCX-3 series walk behind concrete saw is ideal for small to medium jobs that require power and portability8 hp Honda motorEquipped with Poly V-belts for optimum power transmission. Quick belt tensioning system.
- Use with water when cuttingA deep 7-inch cutting depth6-1/2 hp Honda gas powered motorCX-3 saw is compact, lightweight and engineered for maneuverability and reliabilityOne-piece unitized box chassisLeft and right cutting capability. Integrated tool box.
- Max depth of 2"Will use up to a 16-inch blade with a 3-5 mil thicknessAdjustable depth control and left and right cutting capabilityBuilt-in water distribution system supplies water to both sides of the blade4-5/8" depth of cutSelf-contained differential drive system eliminating drive gear from rear wheels and related wear.
- Replacement bladeLarge 26 liter water tankComes with a 12" MK-CX-3 dry cutting diamond bladeDesigned for left or right mounting of blade and blade guard and hinged blade guard provides easy access for blade changes and inspection3600 rpmPatent-pending raise/lower assist system, using springs.
- Maximum performanceDurable 16 HP air cooled OHV Carb approved engine with low oil shutoff and recoil start provides fast starting.One year limited warrantyFolding handle bar for compact transportOne-year limited warrantyConsole with engine start/stop switch and throttle, transmission control lever, tachometer/timer
Check price and buy Husqvarna 24HP FS524 Walk Behind Concrete Saw at Amazon.com |
|
|
|
Diamond Blade 18" Super Duty Fast Cutting Hard Concrete / Hard Aggregates Walk Behind Saw Blade |
- Used for concrete applicationsFloor saw blade diameter is a extra large 16-inch for the big jobs. One diamond blade is included with saw.14" blade capacity with a 5-5/8" depth of cutCX-3 series walk behind concrete saw is ideal for small to medium jobs that require power and portability8 hp Honda motorEquipped with Poly V-belts for optimum power transmission. Quick belt tensioning system.Diameter: 18 inch x .140"
- Use with water when cuttingA deep 7-inch cutting depth6-1/2 hp Honda gas powered motorCX-3 saw is compact, lightweight and engineered for maneuverability and reliabilityOne-piece unitized box chassisLeft and right cutting capability. Integrated tool box.Segment Height: 12mm
- Max depth of 2"Will use up to a 16-inch blade with a 3-5 mil thicknessAdjustable depth control and left and right cutting capabilityBuilt-in water distribution system supplies water to both sides of the blade4-5/8" depth of cutSelf-contained differential drive system eliminating drive gear from rear wheels and related wear.Arbor/Bore Size: 1 inch - 20mm
- Replacement bladeLarge 26 liter water tankComes with a 12" MK-CX-3 dry cutting diamond bladeDesigned for left or right mounting of blade and blade guard and hinged blade guard provides easy access for blade changes and inspection3600 rpmPatent-pending raise/lower assist system, using springs.Cutting Method: Dry or Wet
- Maximum performanceDurable 16 HP air cooled OHV Carb approved engine with low oil shutoff and recoil start provides fast starting.One year limited warrantyFolding handle bar for compact transportOne-year limited warrantyConsole with engine start/stop switch and throttle, transmission control lever, tachometer/timerApplication: Concrete, Reinforced Concrete, Natural Stone and Hard Aggregates.
Check price and buy Diamond Blade 18" Super Duty Fast Cutting Hard Concrete / Hard Aggregates Walk Behind Saw Blade at Amazon.com |
|
|
|
16" Hellcat Walk Behind Concrete Saw W/20.5 HP Gas Engine |
- Used for concrete applicationsFloor saw blade diameter is a extra large 16-inch for the big jobs. One diamond blade is included with saw.14" blade capacity with a 5-5/8" depth of cutCX-3 series walk behind concrete saw is ideal for small to medium jobs that require power and portability8 hp Honda motorEquipped with Poly V-belts for optimum power transmission. Quick belt tensioning system.Diameter: 18 inch x .140"Capacity: 16" blade
- Use with water when cuttingA deep 7-inch cutting depth6-1/2 hp Honda gas powered motorCX-3 saw is compact, lightweight and engineered for maneuverability and reliabilityOne-piece unitized box chassisLeft and right cutting capability. Integrated tool box.Segment Height: 12mmEngine: 20.5 HP Robin Gas Engine
- Max depth of 2"Will use up to a 16-inch blade with a 3-5 mil thicknessAdjustable depth control and left and right cutting capabilityBuilt-in water distribution system supplies water to both sides of the blade4-5/8" depth of cutSelf-contained differential drive system eliminating drive gear from rear wheels and related wear.Arbor/Bore Size: 1 inch - 20mmBlade Size Accomodations: 14" ~ 20"
- Replacement bladeLarge 26 liter water tankComes with a 12" MK-CX-3 dry cutting diamond bladeDesigned for left or right mounting of blade and blade guard and hinged blade guard provides easy access for blade changes and inspection3600 rpmPatent-pending raise/lower assist system, using springs.Cutting Method: Dry or WetDesigned to cut concrete and/or asphalt
- Maximum performanceDurable 16 HP air cooled OHV Carb approved engine with low oil shutoff and recoil start provides fast starting.One year limited warrantyFolding handle bar for compact transportOne-year limited warrantyConsole with engine start/stop switch and throttle, transmission control lever, tachometer/timerApplication: Concrete, Reinforced Concrete, Natural Stone and Hard Aggregates.Great for large cutting projects
Check price and buy 16" Hellcat Walk Behind Concrete Saw W/20.5 HP Gas Engine at Amazon.com |
|
|
|
MK Diamond 150936 MK-9514E1 5 Horsepower 14-Inch Walk Behind Concrete Saw, 230-Volt |
- Used for concrete applicationsFloor saw blade diameter is a extra large 16-inch for the big jobs. One diamond blade is included with saw.14" blade capacity with a 5-5/8" depth of cutCX-3 series walk behind concrete saw is ideal for small to medium jobs that require power and portability8 hp Honda motorEquipped with Poly V-belts for optimum power transmission. Quick belt tensioning system.Diameter: 18 inch x .140"Capacity: 16" bladeOne-piece box construction chassis made from 3/16" hot-rolled steel will not flex during operation
- Use with water when cuttingA deep 7-inch cutting depth6-1/2 hp Honda gas powered motorCX-3 saw is compact, lightweight and engineered for maneuverability and reliabilityOne-piece unitized box chassisLeft and right cutting capability. Integrated tool box.Segment Height: 12mmEngine: 20.5 HP Robin Gas EngineProfessional 1-1/4" diameter blade shaft expertly machined to ensure accurate cutting and minimize vibration
- Max depth of 2"Will use up to a 16-inch blade with a 3-5 mil thicknessAdjustable depth control and left and right cutting capabilityBuilt-in water distribution system supplies water to both sides of the blade4-5/8" depth of cutSelf-contained differential drive system eliminating drive gear from rear wheels and related wear.Arbor/Bore Size: 1 inch - 20mmBlade Size Accomodations: 14" ~ 20"Depth control shaft is machined from 3/4" hardened steel and is supported by rugged bearing assembly to resist bending
- Replacement bladeLarge 26 liter water tankComes with a 12" MK-CX-3 dry cutting diamond bladeDesigned for left or right mounting of blade and blade guard and hinged blade guard provides easy access for blade changes and inspection3600 rpmPatent-pending raise/lower assist system, using springs.Cutting Method: Dry or WetDesigned to cut concrete and/or asphaltParallel cuts can be made from both left and right sides of the saw within 1" of wall or curb
- Maximum performanceDurable 16 HP air cooled OHV Carb approved engine with low oil shutoff and recoil start provides fast starting.One year limited warrantyFolding handle bar for compact transportOne-year limited warrantyConsole with engine start/stop switch and throttle, transmission control lever, tachometer/timerApplication: Concrete, Reinforced Concrete, Natural Stone and Hard Aggregates.Great for large cutting projectsTorque delivered smoothly by two heavy-duty heat
- &
- oil treated tri-power notched V-belts
Check price and buy MK Diamond 150936 MK-9514E1 5 Horsepower 14-Inch Walk Behind Concrete Saw, 230-Volt at Amazon.com |
|
|
|
Gila Diamond Blade 18" Pro-Cut Turbo Segmented Walk Behind Concrete Saw Blade |
- Used for concrete applicationsFloor saw blade diameter is a extra large 16-inch for the big jobs. One diamond blade is included with saw.14" blade capacity with a 5-5/8" depth of cutCX-3 series walk behind concrete saw is ideal for small to medium jobs that require power and portability8 hp Honda motorEquipped with Poly V-belts for optimum power transmission. Quick belt tensioning system.Diameter: 18 inch x .140"Capacity: 16" bladeOne-piece box construction chassis made from 3/16" hot-rolled steel will not flex during operationDiameter: 18 inch
- Use with water when cuttingA deep 7-inch cutting depth6-1/2 hp Honda gas powered motorCX-3 saw is compact, lightweight and engineered for maneuverability and reliabilityOne-piece unitized box chassisLeft and right cutting capability. Integrated tool box.Segment Height: 12mmEngine: 20.5 HP Robin Gas EngineProfessional 1-1/4" diameter blade shaft expertly machined to ensure accurate cutting and minimize vibrationSegment Height: 10mm
- Max depth of 2"Will use up to a 16-inch blade with a 3-5 mil thicknessAdjustable depth control and left and right cutting capabilityBuilt-in water distribution system supplies water to both sides of the blade4-5/8" depth of cutSelf-contained differential drive system eliminating drive gear from rear wheels and related wear.Arbor/Bore Size: 1 inch - 20mmBlade Size Accomodations: 14" ~ 20"Depth control shaft is machined from 3/4" hardened steel and is supported by rugged bearing assembly to resist bendingArbor/Bore Size: 1 inch - 20mm
- Replacement bladeLarge 26 liter water tankComes with a 12" MK-CX-3 dry cutting diamond bladeDesigned for left or right mounting of blade and blade guard and hinged blade guard provides easy access for blade changes and inspection3600 rpmPatent-pending raise/lower assist system, using springs.Cutting Method: Dry or WetDesigned to cut concrete and/or asphaltParallel cuts can be made from both left and right sides of the saw within 1" of wall or curbCutting Method: Dry or Wet
- Maximum performanceDurable 16 HP air cooled OHV Carb approved engine with low oil shutoff and recoil start provides fast starting.One year limited warrantyFolding handle bar for compact transportOne-year limited warrantyConsole with engine start/stop switch and throttle, transmission control lever, tachometer/timerApplication: Concrete, Reinforced Concrete, Natural Stone and Hard Aggregates.Great for large cutting projectsTorque delivered smoothly by two heavy-duty heatApplication: Concrete, Reinforced Concrete, Brick, Block, Natural Stone and Hard Aggregates.
- &
- oil treated tri-power notched V-belts
Check price and buy Gila Diamond Blade 18" Pro-Cut Turbo Segmented Walk Behind Concrete Saw Blade at Amazon.com |
|
|
