|
|
|
|
Factory-Reconditioned Bostitch U/CPACK1850BN 18-Gauge Brad Nailer and Compressor Combo Kit |
- Oil-free engine: requires no daily maintenance and eliminates risk of oil stains on work surfacesCAP2000P-OF 2.0 HP (peak) oil-free compressor
- Selectable trigger system: easy conversion between sequential or contact modes. Trigger lockout mode for use when working in occupied spacesSB-1850BN 2-inch 18GA brad nailer
- Dial-A-Depth control: quickly and conveniently set fasteners to desired depths1/4-inch by 25-foot PVC air hose with fittings
- Swivel air fitting: increased maneuverability, filtered air inlet for improved engine durabilityBrad nailer features adjustable depth guide, tool-free adjustable exhaust and no-mar tip, drives 18-gauge brads from 5/8-Inch to 2-Inch in length
- Reversible belt hook: with integrated pencil sharpener for ultimate convenienceCompressor offers 2.8-cfm at 90-psi with 150 max, large 6-gallon reserve tank, impact-resistant shroud protects gauges
Check price and buy Factory-Reconditioned Bostitch U/CPACK1850BN 18-Gauge Brad Nailer and Compressor Combo Kit at Amazon.com |
|
|
|
|
|
DEWALT DC608K 18-Volt 18-Gauge 2-Inch Brad Nailer Kit |
- Oil-free engine: requires no daily maintenance and eliminates risk of oil stains on work surfacesCAP2000P-OF 2.0 HP (peak) oil-free compressor2 gallon, oil-free air compressorEngine design allows the tool to work as fast as the end user with consistent nail penetration into both soft and hard joints
- Selectable trigger system: easy conversion between sequential or contact modes. Trigger lockout mode for use when working in occupied spacesSB-1850BN 2-inch 18GA brad nailer1-1/4-inch brad nailer/stapler combo gunSequential operating mode allows for precision placement and the bump operating mode provides the user with production speed.
- Dial-A-Depth control: quickly and conveniently set fasteners to desired depths1/4-inch by 25-foot PVC air hose with fittingsPerfect for small projectsStraight magazine, accepts 18 gauge nails ranging in legths from 5/8-inch to 2-inch
- Swivel air fitting: increased maneuverability, filtered air inlet for improved engine durabilityBrad nailer features adjustable depth guide, tool-free adjustable exhaust and no-mar tip, drives 18-gauge brads from 5/8-Inch to 2-Inch in lengthAll-inclusive kit to get started right out of the boxEasy access to the nosepiece for the removal of jammed nails without the use of screwdrivers or tool wrenches
- Reversible belt hook: with integrated pencil sharpener for ultimate convenienceCompressor offers 2.8-cfm at 90-psi with 150 max, large 6-gallon reserve tank, impact-resistant shroud protects gaugesSmall and Compact for Easy StoragePart of the XRP DEWALT Cordless system; Contact Trip Lock-Off allows trigger to be disabled when not in use
Check price and buy DEWALT DC608K 18-Volt 18-Gauge 2-Inch Brad Nailer Kit at Amazon.com |
|
|
|
Factory-Reconditioned Ryobi ZRP300 One+ Nailer/Stapler |
- Oil-free engine: requires no daily maintenance and eliminates risk of oil stains on work surfacesCAP2000P-OF 2.0 HP (peak) oil-free compressor2 gallon, oil-free air compressorEngine design allows the tool to work as fast as the end user with consistent nail penetration into both soft and hard jointsBrad nail size: 3/4" up to 1-1/4"
- Selectable trigger system: easy conversion between sequential or contact modes. Trigger lockout mode for use when working in occupied spacesSB-1850BN 2-inch 18GA brad nailer1-1/4-inch brad nailer/stapler combo gunSequential operating mode allows for precision placement and the bump operating mode provides the user with production speed.Staple size: 1/4" up to 9/16" (3/8" crown width)
- Dial-A-Depth control: quickly and conveniently set fasteners to desired depths1/4-inch by 25-foot PVC air hose with fittingsPerfect for small projectsStraight magazine, accepts 18 gauge nails ranging in legths from 5/8-inch to 2-inchEasy to load magazine accepts up to 100 brad nails or 84 staples
- Swivel air fitting: increased maneuverability, filtered air inlet for improved engine durabilityBrad nailer features adjustable depth guide, tool-free adjustable exhaust and no-mar tip, drives 18-gauge brads from 5/8-Inch to 2-Inch in lengthAll-inclusive kit to get started right out of the boxEasy access to the nosepiece for the removal of jammed nails without the use of screwdrivers or tool wrenchesFront activation pin on the magazine helps prevent accidental firing
- Reversible belt hook: with integrated pencil sharpener for ultimate convenienceCompressor offers 2.8-cfm at 90-psi with 150 max, large 6-gallon reserve tank, impact-resistant shroud protects gaugesSmall and Compact for Easy StoragePart of the XRP DEWALT Cordless system; Contact Trip Lock-Off allows trigger to be disabled when not in useOvermold grip for in
- creased user comfort
Check price and buy Factory-Reconditioned Ryobi ZRP300 One+ Nailer/Stapler at Amazon.com |
|
|
|
Factory-Reconditioned RIDGID ZRR213BNA 2-1/8-Inch 18-Gauge Brad Nailer with Magnesium Housing |
- Oil-free engine: requires no daily maintenance and eliminates risk of oil stains on work surfacesCAP2000P-OF 2.0 HP (peak) oil-free compressor2 gallon, oil-free air compressorEngine design allows the tool to work as fast as the end user with consistent nail penetration into both soft and hard jointsBrad nail size: 3/4" up to 1-1/4"Fastener Type: 18-guage brad nails
- Selectable trigger system: easy conversion between sequential or contact modes. Trigger lockout mode for use when working in occupied spacesSB-1850BN 2-inch 18GA brad nailer1-1/4-inch brad nailer/stapler combo gunSequential operating mode allows for precision placement and the bump operating mode provides the user with production speed.Staple size: 1/4" up to 9/16" (3/8" crown width)Fastener Range: 5/8 inch to 2-1/8 inches
- Dial-A-Depth control: quickly and conveniently set fasteners to desired depths1/4-inch by 25-foot PVC air hose with fittingsPerfect for small projectsStraight magazine, accepts 18 gauge nails ranging in legths from 5/8-inch to 2-inchEasy to load magazine accepts up to 100 brad nails or 84 staplesFeatures magnesium housing and weighs just 2.4 lbs
- Swivel air fitting: increased maneuverability, filtered air inlet for improved engine durabilityBrad nailer features adjustable depth guide, tool-free adjustable exhaust and no-mar tip, drives 18-gauge brads from 5/8-Inch to 2-Inch in lengthAll-inclusive kit to get started right out of the boxEasy access to the nosepiece for the removal of jammed nails without the use of screwdrivers or tool wrenchesFront activation pin on the magazine helps prevent accidental firingMagazine Capacity: 100 Nails
- Reversible belt hook: with integrated pencil sharpener for ultimate convenienceCompressor offers 2.8-cfm at 90-psi with 150 max, large 6-gallon reserve tank, impact-resistant shroud protects gaugesSmall and Compact for Easy StoragePart of the XRP DEWALT Cordless system; Contact Trip Lock-Off allows trigger to be disabled when not in useOvermold grip for inIncludes case, 1,000 brads, eye protection, and 2 wrenches
- creased user comfort
Check price and buy Factory-Reconditioned RIDGID ZRR213BNA 2-1/8-Inch 18-Gauge Brad Nailer with Magnesium Housing at Amazon.com |
|
|
|
Factory-Reconditioned Bostitch U/SX1838K 18-Gauge Narrow-Crown Stapler |
- Oil-free engine: requires no daily maintenance and eliminates risk of oil stains on work surfacesCAP2000P-OF 2.0 HP (peak) oil-free compressor2 gallon, oil-free air compressorEngine design allows the tool to work as fast as the end user with consistent nail penetration into both soft and hard jointsBrad nail size: 3/4" up to 1-1/4"Fastener Type: 18-guage brad nailsOil-free engine: requires no daily maintenance and eliminates risk of oil stains on work surfaces
- Selectable trigger system: easy conversion between sequential or contact modes. Trigger lockout mode for use when working in occupied spacesSB-1850BN 2-inch 18GA brad nailer1-1/4-inch brad nailer/stapler combo gunSequential operating mode allows for precision placement and the bump operating mode provides the user with production speed.Staple size: 1/4" up to 9/16" (3/8" crown width)Fastener Range: 5/8 inch to 2-1/8 inchesSelectable trigger system: easy conversion between sequential or contact modes, trigger lockout mode for use when working in occupied spaces
- Dial-A-Depth control: quickly and conveniently set fasteners to desired depths1/4-inch by 25-foot PVC air hose with fittingsPerfect for small projectsStraight magazine, accepts 18 gauge nails ranging in legths from 5/8-inch to 2-inchEasy to load magazine accepts up to 100 brad nails or 84 staplesFeatures magnesium housing and weighs just 2.4 lbsDial-A-Depth control: quickly and conveniently set fasteners to desired depths
- Swivel air fitting: increased maneuverability, filtered air inlet for improved engine durabilityBrad nailer features adjustable depth guide, tool-free adjustable exhaust and no-mar tip, drives 18-gauge brads from 5/8-Inch to 2-Inch in lengthAll-inclusive kit to get started right out of the boxEasy access to the nosepiece for the removal of jammed nails without the use of screwdrivers or tool wrenchesFront activation pin on the magazine helps prevent accidental firingMagazine Capacity: 100 NailsSwivel air fitting: increased maneuverability, filtered air inlet for improved engine durability
- Reversible belt hook: with integrated pencil sharpener for ultimate convenienceCompressor offers 2.8-cfm at 90-psi with 150 max, large 6-gallon reserve tank, impact-resistant shroud protects gaugesSmall and Compact for Easy StoragePart of the XRP DEWALT Cordless system; Contact Trip Lock-Off allows trigger to be disabled when not in useOvermold grip for inIncludes case, 1,000 brads, eye protection, and 2 wrenchesReversible belt hook: with integrated pencil sharpener for ultimate convenience
- creased user comfort
Check price and buy Factory-Reconditioned Bostitch U/SX1838K 18-Gauge Narrow-Crown Stapler at Amazon.com |
|
|
|
Factory-Reconditioned Bostitch U/CPACK300 3-Tool and Compressor Combo Kit |
- Oil-free engine: requires no daily maintenance and eliminates risk of oil stains on work surfacesCAP2000P-OF 2.0 HP (peak) oil-free compressor2 gallon, oil-free air compressorEngine design allows the tool to work as fast as the end user with consistent nail penetration into both soft and hard jointsBrad nail size: 3/4" up to 1-1/4"Fastener Type: 18-guage brad nailsOil-free engine: requires no daily maintenance and eliminates risk of oil stains on work surfacesKit includes: 18-Gauge Brad Nailer (5/8-inch to 2-inch Brads), 18-Gauge Finish Stapler (7/32-inch Narrow Crown Staples 1/2-inch to 1-1/2-inch length), 16-Gauge Finish Nailer (Stright Finish Nails 1-1/4-inch to 2-1/2-inch length).
- Selectable trigger system: easy conversion between sequential or contact modes. Trigger lockout mode for use when working in occupied spacesSB-1850BN 2-inch 18GA brad nailer1-1/4-inch brad nailer/stapler combo gunSequential operating mode allows for precision placement and the bump operating mode provides the user with production speed.Staple size: 1/4" up to 9/16" (3/8" crown width)Fastener Range: 5/8 inch to 2-1/8 inchesSelectable trigger system: easy conversion between sequential or contact modes, trigger lockout mode for use when working in occupied spacesIncludes factory reconditioned 6-gallon oil-free compresor - 2.8 CFM at 90 PSI with 150 max
- Dial-A-Depth control: quickly and conveniently set fasteners to desired depths1/4-inch by 25-foot PVC air hose with fittingsPerfect for small projectsStraight magazine, accepts 18 gauge nails ranging in legths from 5/8-inch to 2-inchEasy to load magazine accepts up to 100 brad nails or 84 staplesFeatures magnesium housing and weighs just 2.4 lbsDial-A-Depth control: quickly and conveniently set fasteners to desired depthsAccessories included: 40-foot PVC hose
- Swivel air fitting: increased maneuverability, filtered air inlet for improved engine durabilityBrad nailer features adjustable depth guide, tool-free adjustable exhaust and no-mar tip, drives 18-gauge brads from 5/8-Inch to 2-Inch in lengthAll-inclusive kit to get started right out of the boxEasy access to the nosepiece for the removal of jammed nails without the use of screwdrivers or tool wrenchesFront activation pin on the magazine helps prevent accidental firingMagazine Capacity: 100 NailsSwivel air fitting: increased maneuverability, filtered air inlet for improved engine durabilityIncludes canvas carrying case
- Reversible belt hook: with integrated pencil sharpener for ultimate convenienceCompressor offers 2.8-cfm at 90-psi with 150 max, large 6-gallon reserve tank, impact-resistant shroud protects gaugesSmall and Compact for Easy StoragePart of the XRP DEWALT Cordless system; Contact Trip Lock-Off allows trigger to be disabled when not in useOvermold grip for inIncludes case, 1,000 brads, eye protection, and 2 wrenchesReversible belt hook: with integrated pencil sharpener for ultimate convenience1-Year Limited Warranty
- creased user comfort
Check price and buy Factory-Reconditioned Bostitch U/CPACK300 3-Tool and Compressor Combo Kit at Amazon.com |
|
|
|
Factory-Reconditioned Bostitch U/SB-2IN1 2-In-1 Narrow Crown Stapler/18-Gauge Brad Nailer |
- Oil-free engine: requires no daily maintenance and eliminates risk of oil stains on work surfacesCAP2000P-OF 2.0 HP (peak) oil-free compressor2 gallon, oil-free air compressorEngine design allows the tool to work as fast as the end user with consistent nail penetration into both soft and hard jointsBrad nail size: 3/4" up to 1-1/4"Fastener Type: 18-guage brad nailsOil-free engine: requires no daily maintenance and eliminates risk of oil stains on work surfacesKit includes: 18-Gauge Brad Nailer (5/8-inch to 2-inch Brads), 18-Gauge Finish Stapler (7/32-inch Narrow Crown Staples 1/2-inch to 1-1/2-inch length), 16-Gauge Finish Nailer (Stright Finish Nails 1-1/4-inch to 2-1/2-inch length).Reconditioned Bostitch Products have a One-year warranty through the Bostitch factory or an authorized service center
- Selectable trigger system: easy conversion between sequential or contact modes. Trigger lockout mode for use when working in occupied spacesSB-1850BN 2-inch 18GA brad nailer1-1/4-inch brad nailer/stapler combo gunSequential operating mode allows for precision placement and the bump operating mode provides the user with production speed.Staple size: 1/4" up to 9/16" (3/8" crown width)Fastener Range: 5/8 inch to 2-1/8 inchesSelectable trigger system: easy conversion between sequential or contact modes, trigger lockout mode for use when working in occupied spacesIncludes factory reconditioned 6-gallon oil-free compresor - 2.8 CFM at 90 PSI with 150 max5/8- to 1-5/8 18-gauge brad nailer and ½- to 1-1/2-inch 18 crown staple combo tool
- Dial-A-Depth control: quickly and conveniently set fasteners to desired depths1/4-inch by 25-foot PVC air hose with fittingsPerfect for small projectsStraight magazine, accepts 18 gauge nails ranging in legths from 5/8-inch to 2-inchEasy to load magazine accepts up to 100 brad nails or 84 staplesFeatures magnesium housing and weighs just 2.4 lbsDial-A-Depth control: quickly and conveniently set fasteners to desired depthsAccessories included: 40-foot PVC hoseAdjustable depth dial; tool-free directional exhaust; 135 in./lbs. driving power
- Swivel air fitting: increased maneuverability, filtered air inlet for improved engine durabilityBrad nailer features adjustable depth guide, tool-free adjustable exhaust and no-mar tip, drives 18-gauge brads from 5/8-Inch to 2-Inch in lengthAll-inclusive kit to get started right out of the boxEasy access to the nosepiece for the removal of jammed nails without the use of screwdrivers or tool wrenchesFront activation pin on the magazine helps prevent accidental firingMagazine Capacity: 100 NailsSwivel air fitting: increased maneuverability, filtered air inlet for improved engine durabilityIncludes canvas carrying caseNail lock-out feature eliminates dry firing; magazine holds 100 nails
- Reversible belt hook: with integrated pencil sharpener for ultimate convenienceCompressor offers 2.8-cfm at 90-psi with 150 max, large 6-gallon reserve tank, impact-resistant shroud protects gaugesSmall and Compact for Easy StoragePart of the XRP DEWALT Cordless system; Contact Trip Lock-Off allows trigger to be disabled when not in useOvermold grip for inIncludes case, 1,000 brads, eye protection, and 2 wrenchesReversible belt hook: with integrated pencil sharpener for ultimate convenience1-Year Limited Warranty
- creased user comfort
Check price and buy Factory-Reconditioned Bostitch U/SB-2IN1 2-In-1 Narrow Crown Stapler/18-Gauge Brad Nailer at Amazon.com |
|
|
|
Bostitch CPack1850BN 2-Inch Brad Nailer and Compressor Combo Kit |
- Oil-free engine: requires no daily maintenance and eliminates risk of oil stains on work surfacesCAP2000P-OF 2.0 HP (peak) oil-free compressor2 gallon, oil-free air compressorEngine design allows the tool to work as fast as the end user with consistent nail penetration into both soft and hard jointsBrad nail size: 3/4" up to 1-1/4"Fastener Type: 18-guage brad nailsOil-free engine: requires no daily maintenance and eliminates risk of oil stains on work surfacesKit includes: 18-Gauge Brad Nailer (5/8-inch to 2-inch Brads), 18-Gauge Finish Stapler (7/32-inch Narrow Crown Staples 1/2-inch to 1-1/2-inch length), 16-Gauge Finish Nailer (Stright Finish Nails 1-1/4-inch to 2-1/2-inch length).Reconditioned Bostitch Products have a One-year warranty through the Bostitch factory or an authorized service centerBostitch 2-Inch brad nailer and compressor combo kit is perfect for all of your around-the-house projects
- Selectable trigger system: easy conversion between sequential or contact modes. Trigger lockout mode for use when working in occupied spacesSB-1850BN 2-inch 18GA brad nailer1-1/4-inch brad nailer/stapler combo gunSequential operating mode allows for precision placement and the bump operating mode provides the user with production speed.Staple size: 1/4" up to 9/16" (3/8" crown width)Fastener Range: 5/8 inch to 2-1/8 inchesSelectable trigger system: easy conversion between sequential or contact modes, trigger lockout mode for use when working in occupied spacesIncludes factory reconditioned 6-gallon oil-free compresor - 2.8 CFM at 90 PSI with 150 max5/8- to 1-5/8 18-gauge brad nailer and ½- to 1-1/2-inch 18 crown staple combo toolThe oil-free air compressor offers 2.8-cfm at 90-psi with 150 max, large 6-Gallon reserve tank, impact-resistant shroud to protect gauges, and weighs only 38-Pound
- Dial-A-Depth control: quickly and conveniently set fasteners to desired depths1/4-inch by 25-foot PVC air hose with fittingsPerfect for small projectsStraight magazine, accepts 18 gauge nails ranging in legths from 5/8-inch to 2-inchEasy to load magazine accepts up to 100 brad nails or 84 staplesFeatures magnesium housing and weighs just 2.4 lbsDial-A-Depth control: quickly and conveniently set fasteners to desired depthsAccessories included: 40-foot PVC hoseAdjustable depth dial; tool-free directional exhaust; 135 in./lbs. driving powerThe brad nailer features adjustable depth guide, tool-free adjustable exhaust and no mar tip, and drives 18-gauge brads 5/8-to-2-Inch in length
- Swivel air fitting: increased maneuverability, filtered air inlet for improved engine durabilityBrad nailer features adjustable depth guide, tool-free adjustable exhaust and no-mar tip, drives 18-gauge brads from 5/8-Inch to 2-Inch in lengthAll-inclusive kit to get started right out of the boxEasy access to the nosepiece for the removal of jammed nails without the use of screwdrivers or tool wrenchesFront activation pin on the magazine helps prevent accidental firingMagazine Capacity: 100 NailsSwivel air fitting: increased maneuverability, filtered air inlet for improved engine durabilityIncludes canvas carrying caseNail lock-out feature eliminates dry firing; magazine holds 100 nailsAccessories Include 1/4-Inch by 40-Feet PVC air hose with fittings, 1000 2-Inch brads, tool lubricant, and carrying case
- Reversible belt hook: with integrated pencil sharpener for ultimate convenienceCompressor offers 2.8-cfm at 90-psi with 150 max, large 6-gallon reserve tank, impact-resistant shroud protects gaugesSmall and Compact for Easy StoragePart of the XRP DEWALT Cordless system; Contact Trip Lock-Off allows trigger to be disabled when not in useOvermold grip for inIncludes case, 1,000 brads, eye protection, and 2 wrenchesReversible belt hook: with integrated pencil sharpener for ultimate convenience1-Year Limited WarrantyBacked by 7-year limited warranty
- creased user comfort
Check price and buy Bostitch CPack1850BN 2-Inch Brad Nailer and Compressor Combo Kit at Amazon.com |
|
|
|
