|
|
|
|
Floor Nailer for Installing Hardwood Flooring - Bamboo, Oak, Maple, Brazilian Cherry, Hickory, Walnut, Hand Scraped, Prefinished and Engineered Wood Flooring |
- 1 Year WarrantyFloor nailer (Hardcore Tools® Brand) light weight cast aluminum, colors may vary!
- Uses staples, T-Cleats, and L-CleatsOperates with any compressor with standard connectors, 60-100 PSI
- White Rubber MalletHigh-capacity magazine for reload time. Reliably drives staples at proper angle and depth.
- Interchangeable Base PlatesNon-marring base plates are adjustable for 1/2 to 3/4 inch hardwood floor installation.
- Hardened Driver BladeDurable plastic carrying case for tool, inclues mallet, oil, hex tools, o-rings and safety googles.
Check price and buy Floor Nailer for Installing Hardwood Flooring - Bamboo, Oak, Maple, Brazilian Cherry, Hickory, Walnut, Hand Scraped, Prefinished and Engineered Wood Flooring at Amazon.com |
|
|
|
Freeman PFL618BR 3-in-1 Pneumatic Flooring Nailer |
- 1 Year WarrantyFloor nailer (Hardcore Tools® Brand) light weight cast aluminum, colors may vary!Shoots three types of fasteners without changing magazine rail T-cleats L-cleats and staples
- Uses staples, T-Cleats, and L-CleatsOperates with any compressor with standard connectors, 60-100 PSIAnodized aluminum and oil-less parts for extended wear
- White Rubber MalletHigh-capacity magazine for reload time. Reliably drives staples at proper angle and depth.Durable plastic carrying case
- Interchangeable Base PlatesNon-marring base plates are adjustable for 1/2 to 3/4 inch hardwood floor installation.Interchangeable floor plates for different thicknesses of flooring
- Hardened Driver BladeDurable plastic carrying case for tool, inclues mallet, oil, hex tools, o-rings and safety googles.7-year limited warranty
Check price and buy Freeman PFL618BR 3-in-1 Pneumatic Flooring Nailer at Amazon.com |
|
|
|
BOSTITCH FLN-200 2-Inch Flooring L-Nail, 1000-Per Box |
- 1 Year WarrantyFloor nailer (Hardcore Tools® Brand) light weight cast aluminum, colors may vary!Shoots three types of fasteners without changing magazine rail T-cleats L-cleats and staplesTwo-Inch L-shaped flooring cleats for the Bostitch MIIIFN-industrial flooring cleat nailer
- Uses staples, T-Cleats, and L-CleatsOperates with any compressor with standard connectors, 60-100 PSIAnodized aluminum and oil-less parts for extended wearCoverage: 1,000 hardwood flooring cleats per 200 square feet of flooring
- White Rubber MalletHigh-capacity magazine for reload time. Reliably drives staples at proper angle and depth.Durable plastic carrying caseFits Bostitch nailers HFN1, MIIIFN, MFN200; Porter-Cable FCN200; powernail 345 and 45; primatech P210, H300, H330 and Q500; Senco SHF50, SHF15 and SHF10; and true value 402578 and MIIIFN
- Interchangeable Base PlatesNon-marring base plates are adjustable for 1/2 to 3/4 inch hardwood floor installation.Interchangeable floor plates for different thicknesses of flooringCoated finish for a polished look
- Hardened Driver BladeDurable plastic carrying case for tool, inclues mallet, oil, hex tools, o-rings and safety googles.7-year limited warrantyBox weighs 3.85-Pound
Check price and buy BOSTITCH FLN-200 2-Inch Flooring L-Nail, 1000-Per Box at Amazon.com |
|
|
|
Porta-Nail 42620 Flooring Nail/Staple Setting Tool |
- 1 Year WarrantyFloor nailer (Hardcore Tools® Brand) light weight cast aluminum, colors may vary!Shoots three types of fasteners without changing magazine rail T-cleats L-cleats and staplesTwo-Inch L-shaped flooring cleats for the Bostitch MIIIFN-industrial flooring cleat nailerSets Porta-Nails
- Uses staples, T-Cleats, and L-CleatsOperates with any compressor with standard connectors, 60-100 PSIAnodized aluminum and oil-less parts for extended wearCoverage: 1,000 hardwood flooring cleats per 200 square feet of flooringSingle handed design allows for precise alignment
- White Rubber MalletHigh-capacity magazine for reload time. Reliably drives staples at proper angle and depth.Durable plastic carrying caseFits Bostitch nailers HFN1, MIIIFN, MFN200; Porter-Cable FCN200; powernail 345 and 45; primatech P210, H300, H330 and Q500; Senco SHF50, SHF15 and SHF10; and true value 402578 and MIIIFNDurable construction for long lasting usability
- Interchangeable Base PlatesNon-marring base plates are adjustable for 1/2 to 3/4 inch hardwood floor installation.Interchangeable floor plates for different thicknesses of flooringCoated finish for a polished lookPrecision point for optimal placement
- Hardened Driver BladeDurable plastic carrying case for tool, inclues mallet, oil, hex tools, o-rings and safety googles.7-year limited warrantyBox weighs 3.85-PoundWide striking head surface
Check price and buy Porta-Nail 42620 Flooring Nail/Staple Setting Tool at Amazon.com |
|
|
|
BOSTITCH MIIIFN 1-1/2- to 2-Inch Pneumatic Flooring Nailer |
- 1 Year WarrantyFloor nailer (Hardcore Tools® Brand) light weight cast aluminum, colors may vary!Shoots three types of fasteners without changing magazine rail T-cleats L-cleats and staplesTwo-Inch L-shaped flooring cleats for the Bostitch MIIIFN-industrial flooring cleat nailerSets Porta-Nails1-1/2-inch to 2-inch pneumatic flooring nailer for driving L-shaped flooring cleats
- Uses staples, T-Cleats, and L-CleatsOperates with any compressor with standard connectors, 60-100 PSIAnodized aluminum and oil-less parts for extended wearCoverage: 1,000 hardwood flooring cleats per 200 square feet of flooringSingle handed design allows for precise alignmentHigh-speed; extra-wide composite base; high-capacity magazine; 420 inch-pounds of driving power
- White Rubber MalletHigh-capacity magazine for reload time. Reliably drives staples at proper angle and depth.Durable plastic carrying caseFits Bostitch nailers HFN1, MIIIFN, MFN200; Porter-Cable FCN200; powernail 345 and 45; primatech P210, H300, H330 and Q500; Senco SHF50, SHF15 and SHF10; and true value 402578 and MIIIFNDurable construction for long lasting usabilityConstructed of aircraft-grade aluminum
- Interchangeable Base PlatesNon-marring base plates are adjustable for 1/2 to 3/4 inch hardwood floor installation.Interchangeable floor plates for different thicknesses of flooringCoated finish for a polished lookPrecision point for optimal placementIncludes rubber-tipped mallet
- Hardened Driver BladeDurable plastic carrying case for tool, inclues mallet, oil, hex tools, o-rings and safety googles.7-year limited warrantyBox weighs 3.85-PoundWide striking head surface17-1/4 by 3-1/8 by 11-1/2; 11.2 pounds; 7-year limited warranty
Check price and buy BOSTITCH MIIIFN 1-1/2- to 2-Inch Pneumatic Flooring Nailer at Amazon.com |
|
|
|
BYNFORD HARDWOOD FLOORING STAPLER NAILER (Uses standard narrow crown staples such asSenco "L" etc) |
- 1 Year WarrantyFloor nailer (Hardcore Tools® Brand) light weight cast aluminum, colors may vary!Shoots three types of fasteners without changing magazine rail T-cleats L-cleats and staplesTwo-Inch L-shaped flooring cleats for the Bostitch MIIIFN-industrial flooring cleat nailerSets Porta-Nails1-1/2-inch to 2-inch pneumatic flooring nailer for driving L-shaped flooring cleatsUses standard 18 gauge narrow crown staples AND 18 gauge brad nails up to 1-9/16"
- Uses staples, T-Cleats, and L-CleatsOperates with any compressor with standard connectors, 60-100 PSIAnodized aluminum and oil-less parts for extended wearCoverage: 1,000 hardwood flooring cleats per 200 square feet of flooringSingle handed design allows for precise alignmentHigh-speed; extra-wide composite base; high-capacity magazine; 420 inch-pounds of driving powerShoe easily adjusts to multiple floor thicknesses
- White Rubber MalletHigh-capacity magazine for reload time. Reliably drives staples at proper angle and depth.Durable plastic carrying caseFits Bostitch nailers HFN1, MIIIFN, MFN200; Porter-Cable FCN200; powernail 345 and 45; primatech P210, H300, H330 and Q500; Senco SHF50, SHF15 and SHF10; and true value 402578 and MIIIFNDurable construction for long lasting usabilityConstructed of aircraft-grade aluminumEasily converts to as standard combination stapler/brad nailer
- Interchangeable Base PlatesNon-marring base plates are adjustable for 1/2 to 3/4 inch hardwood floor installation.Interchangeable floor plates for different thicknesses of flooringCoated finish for a polished lookPrecision point for optimal placementIncludes rubber-tipped malletDesigned for floors from 1/4" - 9/16" (or 3/4" in limited applications)
- Hardened Driver BladeDurable plastic carrying case for tool, inclues mallet, oil, hex tools, o-rings and safety googles.7-year limited warrantyBox weighs 3.85-PoundWide striking head surface17-1/4 by 3-1/8 by 11-1/2; 11.2 pounds; 7-year limited warranty
Check price and buy BYNFORD HARDWOOD FLOORING STAPLER NAILER (Uses standard narrow crown staples such asSenco "L" etc) at Amazon.com |
|
|
|
Factory-Reconditioned BOSTITCH U/MIIIFS 1-1/2-inch to 2-inch Pneumatic Flooring Stapler |
- 1 Year WarrantyFloor nailer (Hardcore Tools® Brand) light weight cast aluminum, colors may vary!Shoots three types of fasteners without changing magazine rail T-cleats L-cleats and staplesTwo-Inch L-shaped flooring cleats for the Bostitch MIIIFN-industrial flooring cleat nailerSets Porta-Nails1-1/2-inch to 2-inch pneumatic flooring nailer for driving L-shaped flooring cleatsUses standard 18 gauge narrow crown staples AND 18 gauge brad nails up to 1-9/16"Reconditioned pneumatic flooring stapler with 420-inch/lbs driving power
- Uses staples, T-Cleats, and L-CleatsOperates with any compressor with standard connectors, 60-100 PSIAnodized aluminum and oil-less parts for extended wearCoverage: 1,000 hardwood flooring cleats per 200 square feet of flooringSingle handed design allows for precise alignmentHigh-speed; extra-wide composite base; high-capacity magazine; 420 inch-pounds of driving powerShoe easily adjusts to multiple floor thicknessesFeatures an extra-wide composite for added stability
- White Rubber MalletHigh-capacity magazine for reload time. Reliably drives staples at proper angle and depth.Durable plastic carrying caseFits Bostitch nailers HFN1, MIIIFN, MFN200; Porter-Cable FCN200; powernail 345 and 45; primatech P210, H300, H330 and Q500; Senco SHF50, SHF15 and SHF10; and true value 402578 and MIIIFNDurable construction for long lasting usabilityConstructed of aircraft-grade aluminumEasily converts to as standard combination stapler/brad nailerDesigned to be used with solid and engineered hardwood flooring-installation processes
- Interchangeable Base PlatesNon-marring base plates are adjustable for 1/2 to 3/4 inch hardwood floor installation.Interchangeable floor plates for different thicknesses of flooringCoated finish for a polished lookPrecision point for optimal placementIncludes rubber-tipped malletDesigned for floors from 1/4" - 9/16" (or 3/4" in limited applications)Includes 92-staple capacity magazine
- Hardened Driver BladeDurable plastic carrying case for tool, inclues mallet, oil, hex tools, o-rings and safety googles.7-year limited warrantyBox weighs 3.85-PoundWide striking head surface17-1/4 by 3-1/8 by 11-1/2; 11.2 pounds; 7-year limited warrantyUses 15 1/2-gauge Staples
Check price and buy Factory-Reconditioned BOSTITCH U/MIIIFS 1-1/2-inch to 2-inch Pneumatic Flooring Stapler at Amazon.com |
|
|
|
Ramsond RMM4 2-in-1 Air Hardwood Flooring Cleat Nailer and Stapler Gun |
- 1 Year WarrantyFloor nailer (Hardcore Tools® Brand) light weight cast aluminum, colors may vary!Shoots three types of fasteners without changing magazine rail T-cleats L-cleats and staplesTwo-Inch L-shaped flooring cleats for the Bostitch MIIIFN-industrial flooring cleat nailerSets Porta-Nails1-1/2-inch to 2-inch pneumatic flooring nailer for driving L-shaped flooring cleatsUses standard 18 gauge narrow crown staples AND 18 gauge brad nails up to 1-9/16"Reconditioned pneumatic flooring stapler with 420-inch/lbs driving powerUses both cleats and staples
- Uses staples, T-Cleats, and L-CleatsOperates with any compressor with standard connectors, 60-100 PSIAnodized aluminum and oil-less parts for extended wearCoverage: 1,000 hardwood flooring cleats per 200 square feet of flooringSingle handed design allows for precise alignmentHigh-speed; extra-wide composite base; high-capacity magazine; 420 inch-pounds of driving powerShoe easily adjusts to multiple floor thicknessesFeatures an extra-wide composite for added stabilityAir operated
- White Rubber MalletHigh-capacity magazine for reload time. Reliably drives staples at proper angle and depth.Durable plastic carrying caseFits Bostitch nailers HFN1, MIIIFN, MFN200; Porter-Cable FCN200; powernail 345 and 45; primatech P210, H300, H330 and Q500; Senco SHF50, SHF15 and SHF10; and true value 402578 and MIIIFNDurable construction for long lasting usabilityConstructed of aircraft-grade aluminumEasily converts to as standard combination stapler/brad nailerDesigned to be used with solid and engineered hardwood flooring-installation processesIncludes all accessories and carrying case
- Interchangeable Base PlatesNon-marring base plates are adjustable for 1/2 to 3/4 inch hardwood floor installation.Interchangeable floor plates for different thicknesses of flooringCoated finish for a polished lookPrecision point for optimal placementIncludes rubber-tipped malletDesigned for floors from 1/4" - 9/16" (or 3/4" in limited applications)Includes 92-staple capacity magazineUses l cleats and u staples
- Hardened Driver BladeDurable plastic carrying case for tool, inclues mallet, oil, hex tools, o-rings and safety googles.7-year limited warrantyBox weighs 3.85-PoundWide striking head surface17-1/4 by 3-1/8 by 11-1/2; 11.2 pounds; 7-year limited warrantyUses 15 1/2-gauge StaplesAir booster chambers for better nail driving
Check price and buy Ramsond RMM4 2-in-1 Air Hardwood Flooring Cleat Nailer and Stapler Gun at Amazon.com |
|
|
|
LSN3 LOTOS 2-in-1 Air Hardwood Flooring Cleat Nailer and Stapler Gun (Special deal by the end of this week) |
- 1 Year WarrantyFloor nailer (Hardcore Tools® Brand) light weight cast aluminum, colors may vary!Shoots three types of fasteners without changing magazine rail T-cleats L-cleats and staplesTwo-Inch L-shaped flooring cleats for the Bostitch MIIIFN-industrial flooring cleat nailerSets Porta-Nails1-1/2-inch to 2-inch pneumatic flooring nailer for driving L-shaped flooring cleatsUses standard 18 gauge narrow crown staples AND 18 gauge brad nails up to 1-9/16"Reconditioned pneumatic flooring stapler with 420-inch/lbs driving powerUses both cleats and staples2-in-1 Combo of Hardwood Flooring STAPLER
- Uses staples, T-Cleats, and L-CleatsOperates with any compressor with standard connectors, 60-100 PSIAnodized aluminum and oil-less parts for extended wearCoverage: 1,000 hardwood flooring cleats per 200 square feet of flooringSingle handed design allows for precise alignmentHigh-speed; extra-wide composite base; high-capacity magazine; 420 inch-pounds of driving powerShoe easily adjusts to multiple floor thicknessesFeatures an extra-wide composite for added stabilityAir operated&
- White Rubber MalletHigh-capacity magazine for reload time. Reliably drives staples at proper angle and depth.Durable plastic carrying caseFits Bostitch nailers HFN1, MIIIFN, MFN200; Porter-Cable FCN200; powernail 345 and 45; primatech P210, H300, H330 and Q500; Senco SHF50, SHF15 and SHF10; and true value 402578 and MIIIFNDurable construction for long lasting usabilityConstructed of aircraft-grade aluminumEasily converts to as standard combination stapler/brad nailerDesigned to be used with solid and engineered hardwood flooring-installation processesIncludes all accessories and carrying case CLEAT NAILER With One Magazine for Both.
- Interchangeable Base PlatesNon-marring base plates are adjustable for 1/2 to 3/4 inch hardwood floor installation.Interchangeable floor plates for different thicknesses of flooringCoated finish for a polished lookPrecision point for optimal placementIncludes rubber-tipped malletDesigned for floors from 1/4" - 9/16" (or 3/4" in limited applications)Includes 92-staple capacity magazineUses l cleats and u staplesStaple Size: 15.5 and 16 Gauge 1"-2" Cleat Size: "L" Shaped 1.5"-2"
- Hardened Driver BladeDurable plastic carrying case for tool, inclues mallet, oil, hex tools, o-rings and safety googles.7-year limited warrantyBox weighs 3.85-PoundWide striking head surface17-1/4 by 3-1/8 by 11-1/2; 11.2 pounds; 7-year limited warrantyUses 15 1/2-gauge StaplesAir booster chambers for better nail drivingLotos carries staples and cleat nails. call 408-739-2329 if you need LOTOS staples or cleat nails
- Air Inlet: Standard 1/4" NPT Fastener Capacity: 100
- Accessories included (check pictures) 3 years warranty on labor and parts
Check price and buy LSN3 LOTOS 2-in-1 Air Hardwood Flooring Cleat Nailer and Stapler Gun (Special deal by the end of this week) at Amazon.com |
|
|
|
