|
|
|
|
|
|
Milwaukee 4270-20 9 Amp Compact Electromagnetic Drill Press |
- Weighs 26-1/2 pounds, comfortable carrying handle, cutter wrenches stored on-board7.2 amp motorPowerful 9.0 amp 1.1 max HP motor
- Powerful 1.1 maximum horsepower, 9.0 amp motor1/2" drill capacityOnly 26.5 lbs. with comfortable carrying handle
- Strong two-coil magnet provides 2,300 lbs. of deadlift force on 1-inch thick steel600 RPM no load speedStrong two-coil magnet
- Simple two-button control panel located on the backSolid state electronic switchingTwo positions for feed handle - relocate without tools
- Lubricant spray bottle, nylon safety strap, two hex wrenches, carrying caseFeedback speed controlSimple two-button control panel - unobstructed by feed handle
Check price and buy Milwaukee 4270-20 9 Amp Compact Electromagnetic Drill Press at Amazon.com |
|
|
|
|
|
Milwaukee 4209-1 Electromagnetic Drill Press |
- Weighs 26-1/2 pounds, comfortable carrying handle, cutter wrenches stored on-board7.2 amp motorPowerful 9.0 amp 1.1 max HP motor12.5 amp motorSolid state electronic switching, 1-1/4-inch capacity, 12.5-amp motor, 750/375 RPM, feedback speed control
- Powerful 1.1 maximum horsepower, 9.0 amp motor1/2" drill capacityOnly 26.5 lbs. with comfortable carrying handle1-1/4" drill capacityLine lock-out prevents tool from operating should voltage be restored to an interrupted line
- Strong two-coil magnet provides 2,300 lbs. of deadlift force on 1-inch thick steel600 RPM no load speedStrong two-coil magnet500/250 RPM no load speedVoltage of 120 AC, 12.5 amps1-1/4-inch drill capacity, no load dpeed
- Simple two-button control panel located on the backSolid state electronic switchingTwo positions for feed handle - relocate without toolsSolid state electronic switchingNine-foot fixed cord, grounded construction, 1-inch tap capacity
- Lubricant spray bottle, nylon safety strap, two hex wrenches, carrying caseFeedback speed controlSimple two-button control panel - unobstructed by feed handleFeedback speed controlDrill point pressure of 1,530 to 1,600 pounds, adjustable base, weighs 72 pounds
Check price and buy Milwaukee 4209-1 Electromagnetic Drill Press at Amazon.com |
|
|
|
Milwaukee 48-11-2830 M28 Lithium-Ion Battery-Pack |
- Weighs 26-1/2 pounds, comfortable carrying handle, cutter wrenches stored on-board7.2 amp motorPowerful 9.0 amp 1.1 max HP motor12.5 amp motorSolid state electronic switching, 1-1/4-inch capacity, 12.5-amp motor, 750/375 RPM, feedback speed controlBattery Fuel Gauge LED's light up to show how much charge is left
- Powerful 1.1 maximum horsepower, 9.0 amp motor1/2" drill capacityOnly 26.5 lbs. with comfortable carrying handle1-1/4" drill capacityLine lock-out prevents tool from operating should voltage be restored to an interrupted lineRubberized-footprint provides impact protection and prevents sliding on slick surfaces
- Strong two-coil magnet provides 2,300 lbs. of deadlift force on 1-inch thick steel600 RPM no load speedStrong two-coil magnet500/250 RPM no load speedVoltage of 120 AC, 12.5 amps1-1/4-inch drill capacity, no load dpeedPerformance Optimizing Circuit improves run time and prolongs battery life
- Simple two-button control panel located on the backSolid state electronic switchingTwo positions for feed handle - relocate without toolsSolid state electronic switchingNine-foot fixed cord, grounded construction, 1-inch tap capacityHeavy Duty Construction withstands up to 10-foot drop
- Lubricant spray bottle, nylon safety strap, two hex wrenches, carrying caseFeedback speed controlSimple two-button control panel - unobstructed by feed handleFeedback speed controlDrill point pressure of 1,530 to 1,600 pounds, adjustable base, weighs 72 poundsLightweight with up to twice the run-time, yet lighter than an 18-volt battery
Check price and buy Milwaukee 48-11-2830 M28 Lithium-Ion Battery-Pack at Amazon.com |
|
|
|
Milwaukee 4203 Adjustable Position Electromagnetic Drill Press Base |
- Weighs 26-1/2 pounds, comfortable carrying handle, cutter wrenches stored on-board7.2 amp motorPowerful 9.0 amp 1.1 max HP motor12.5 amp motorSolid state electronic switching, 1-1/4-inch capacity, 12.5-amp motor, 750/375 RPM, feedback speed controlBattery Fuel Gauge LED's light up to show how much charge is left120-Volt AC only; 12.5 amp max. rating
- Powerful 1.1 maximum horsepower, 9.0 amp motor1/2" drill capacityOnly 26.5 lbs. with comfortable carrying handle1-1/4" drill capacityLine lock-out prevents tool from operating should voltage be restored to an interrupted lineRubberized-footprint provides impact protection and prevents sliding on slick surfaces11-inch drill travel
- Strong two-coil magnet provides 2,300 lbs. of deadlift force on 1-inch thick steel600 RPM no load speedStrong two-coil magnet500/250 RPM no load speedVoltage of 120 AC, 12.5 amps1-1/4-inch drill capacity, no load dpeedPerformance Optimizing Circuit improves run time and prolongs battery lifeAdjustable position, variable speed base
- Simple two-button control panel located on the backSolid state electronic switchingTwo positions for feed handle - relocate without toolsSolid state electronic switchingNine-foot fixed cord, grounded construction, 1-inch tap capacityHeavy Duty Construction withstands up to 10-foot dropFor use on any flat ferrous material, 1/2-inch and thicker
- Lubricant spray bottle, nylon safety strap, two hex wrenches, carrying caseFeedback speed controlSimple two-button control panel - unobstructed by feed handleFeedback speed controlDrill point pressure of 1,530 to 1,600 pounds, adjustable base, weighs 72 poundsLightweight with up to twice the run-time, yet lighter than an 18-volt batteryLimited warranty, 30-day no-risk trial
Check price and buy Milwaukee 4203 Adjustable Position Electromagnetic Drill Press Base at Amazon.com |
|
|
|
Milwaukee 4262-1 11.5 Amp 3/4-Inch Motor for Electromagnetic Drill Press with Chuck |
- Weighs 26-1/2 pounds, comfortable carrying handle, cutter wrenches stored on-board7.2 amp motorPowerful 9.0 amp 1.1 max HP motor12.5 amp motorSolid state electronic switching, 1-1/4-inch capacity, 12.5-amp motor, 750/375 RPM, feedback speed controlBattery Fuel Gauge LED's light up to show how much charge is left120-Volt AC only; 12.5 amp max. rating3/4 inch capacity, 11.5 amp motor, 350 RPM
- Powerful 1.1 maximum horsepower, 9.0 amp motor1/2" drill capacityOnly 26.5 lbs. with comfortable carrying handle1-1/4" drill capacityLine lock-out prevents tool from operating should voltage be restored to an interrupted lineRubberized-footprint provides impact protection and prevents sliding on slick surfaces11-inch drill travelDual mount gear case/reverse mount for tight quarter drilling
- Strong two-coil magnet provides 2,300 lbs. of deadlift force on 1-inch thick steel600 RPM no load speedStrong two-coil magnet500/250 RPM no load speedVoltage of 120 AC, 12.5 amps1-1/4-inch drill capacity, no load dpeedPerformance Optimizing Circuit improves run time and prolongs battery lifeAdjustable position, variable speed baseTaps up to 1-inch/14 threaded hole
- Simple two-button control panel located on the backSolid state electronic switchingTwo positions for feed handle - relocate without toolsSolid state electronic switchingNine-foot fixed cord, grounded construction, 1-inch tap capacityHeavy Duty Construction withstands up to 10-foot dropFor use on any flat ferrous material, 1/2-inch and thickerDevelops up to 1670 pounds of drill point pressure with a 1-inch steel plate
- Lubricant spray bottle, nylon safety strap, two hex wrenches, carrying caseFeedback speed controlSimple two-button control panel - unobstructed by feed handleFeedback speed controlDrill point pressure of 1,530 to 1,600 pounds, adjustable base, weighs 72 poundsLightweight with up to twice the run-time, yet lighter than an 18-volt batteryLimited warranty, 30-day no-risk trialLimited warranty, 30-day no-risk trial
Check price and buy Milwaukee 4262-1 11.5 Amp 3/4-Inch Motor for Electromagnetic Drill Press with Chuck at Amazon.com |
|
|
|
Milwaukee 4210-1 12.5 Amp Electromagnetic Drill Press with 3/4-Inch Motor and Chuck |
- Weighs 26-1/2 pounds, comfortable carrying handle, cutter wrenches stored on-board7.2 amp motorPowerful 9.0 amp 1.1 max HP motor12.5 amp motorSolid state electronic switching, 1-1/4-inch capacity, 12.5-amp motor, 750/375 RPM, feedback speed controlBattery Fuel Gauge LED's light up to show how much charge is left120-Volt AC only; 12.5 amp max. rating3/4 inch capacity, 11.5 amp motor, 350 RPM12.5 amp motor
- Powerful 1.1 maximum horsepower, 9.0 amp motor1/2" drill capacityOnly 26.5 lbs. with comfortable carrying handle1-1/4" drill capacityLine lock-out prevents tool from operating should voltage be restored to an interrupted lineRubberized-footprint provides impact protection and prevents sliding on slick surfaces11-inch drill travelDual mount gear case/reverse mount for tight quarter drilling3/4" drill capacity
- Strong two-coil magnet provides 2,300 lbs. of deadlift force on 1-inch thick steel600 RPM no load speedStrong two-coil magnet500/250 RPM no load speedVoltage of 120 AC, 12.5 amps1-1/4-inch drill capacity, no load dpeedPerformance Optimizing Circuit improves run time and prolongs battery lifeAdjustable position, variable speed baseTaps up to 1-inch/14 threaded hole350 RPM no load speed
- Simple two-button control panel located on the backSolid state electronic switchingTwo positions for feed handle - relocate without toolsSolid state electronic switchingNine-foot fixed cord, grounded construction, 1-inch tap capacityHeavy Duty Construction withstands up to 10-foot dropFor use on any flat ferrous material, 1/2-inch and thickerDevelops up to 1670 pounds of drill point pressure with a 1-inch steel plateSolid state electronic switching
- Lubricant spray bottle, nylon safety strap, two hex wrenches, carrying caseFeedback speed controlSimple two-button control panel - unobstructed by feed handleFeedback speed controlDrill point pressure of 1,530 to 1,600 pounds, adjustable base, weighs 72 poundsLightweight with up to twice the run-time, yet lighter than an 18-volt batteryLimited warranty, 30-day no-risk trialLimited warranty, 30-day no-risk trialFeedback speed control
Check price and buy Milwaukee 4210-1 12.5 Amp Electromagnetic Drill Press with 3/4-Inch Motor and Chuck at Amazon.com |
|
|
|
Milwaukee 4297-1 11.5 Amp 1 1/4-Inch Motor for Electromagnetic Drill Press with No. 3 Morse Taper |
- Weighs 26-1/2 pounds, comfortable carrying handle, cutter wrenches stored on-board7.2 amp motorPowerful 9.0 amp 1.1 max HP motor12.5 amp motorSolid state electronic switching, 1-1/4-inch capacity, 12.5-amp motor, 750/375 RPM, feedback speed controlBattery Fuel Gauge LED's light up to show how much charge is left120-Volt AC only; 12.5 amp max. rating3/4 inch capacity, 11.5 amp motor, 350 RPM12.5 amp motor1-1/4 inch capacity, 11.5 amp motor, 500/250 RPM
- Powerful 1.1 maximum horsepower, 9.0 amp motor1/2" drill capacityOnly 26.5 lbs. with comfortable carrying handle1-1/4" drill capacityLine lock-out prevents tool from operating should voltage be restored to an interrupted lineRubberized-footprint provides impact protection and prevents sliding on slick surfaces11-inch drill travelDual mount gear case/reverse mount for tight quarter drilling3/4" drill capacityDual mount gear case/reverse mount for tight quarter drilling
- Strong two-coil magnet provides 2,300 lbs. of deadlift force on 1-inch thick steel600 RPM no load speedStrong two-coil magnet500/250 RPM no load speedVoltage of 120 AC, 12.5 amps1-1/4-inch drill capacity, no load dpeedPerformance Optimizing Circuit improves run time and prolongs battery lifeAdjustable position, variable speed baseTaps up to 1-inch/14 threaded hole350 RPM no load speedTaps up to 1-inch/14 threaded hole
- Simple two-button control panel located on the backSolid state electronic switchingTwo positions for feed handle - relocate without toolsSolid state electronic switchingNine-foot fixed cord, grounded construction, 1-inch tap capacityHeavy Duty Construction withstands up to 10-foot dropFor use on any flat ferrous material, 1/2-inch and thickerDevelops up to 1670 pounds of drill point pressure with a 1-inch steel plateSolid state electronic switchingDevelops up to 1600 pounds of drill point pressure with a 1-inch steel plate
- Lubricant spray bottle, nylon safety strap, two hex wrenches, carrying caseFeedback speed controlSimple two-button control panel - unobstructed by feed handleFeedback speed controlDrill point pressure of 1,530 to 1,600 pounds, adjustable base, weighs 72 poundsLightweight with up to twice the run-time, yet lighter than an 18-volt batteryLimited warranty, 30-day no-risk trialLimited warranty, 30-day no-risk trialFeedback speed controlLimited warranty, 30-day no-risk trial
Check price and buy Milwaukee 4297-1 11.5 Amp 1 1/4-Inch Motor for Electromagnetic Drill Press with No. 3 Morse Taper at Amazon.com |
|
|
|
