|
|
|
|
Schumacher 230 Volt Plasma Cutter |
- The Schumacher 92035 is an inverter based cutter with cutting capacity of up to 5/16 materials. Inverter design allows extended portability only 14 pounds and added capacity from 230 volt input.
- Features infinite output control for precise cutting and contact type arc starting - Infinite amp selection from 10-30 amps allows optimum cut characteristics
- Pilot arc design allows non-continuous cutting (grates, chain link, expanded metal) without retriggering
- Built-in air regulator and filter - Digital control panel and diagnostic LEDs - 20 foot plasma torch, 15 foot ground cable, and 10 foot power cord
- Non- high frequency arc start - Includes ground cable and clamp, 20 foot torch, adjustable air regulator and spare consumables
Check price and buy Schumacher 230 Volt Plasma Cutter at Amazon.com |
|
|
|
Schumacher Medium Duty Oxy/Acetylene Cutting and Welding Kit |
- The Schumacher 92035 is an inverter based cutter with cutting capacity of up to 5/16 materials. Inverter design allows extended portability only 14 pounds and added capacity from 230 volt input.The Schumacher 90250 is a well-balanced match of components to offer excellent performance on a full range of every day uses
- Features infinite output control for precise cutting and contact type arc starting - Infinite amp selection from 10-30 amps allows optimum cut characteristicsWith included tips, weld up to 1/4 and cut up to 1/2. With optional tips, weld up to 1-1/4 and cut to 6
- Pilot arc design allows non-continuous cutting (grates, chain link, expanded metal) without retriggeringIncludes welding torch, cutting attachment, cutting tip (#0), 3 welding tips (#0,#2,#4), heating tip, oxygen and acetylene regulators, goggles, spark lighter, and 25-ft. gas hose.
- Built-in air regulator and filter - Digital control panel and diagnostic LEDs - 20 foot plasma torch, 15 foot ground cable, and 10 foot power cordPacked in convenient plastic storage case - Components are Victor compatible - UL Approved
- Non- high frequency arc start - Includes ground cable and clamp, 20 foot torch, adjustable air regulator and spare consumables
Check price and buy Schumacher Medium Duty Oxy/Acetylene Cutting and Welding Kit at Amazon.com |
|
|
|
Schumacher Turbo 145 MIG/Flux Welder - 120 Volt |
- The Schumacher 92035 is an inverter based cutter with cutting capacity of up to 5/16 materials. Inverter design allows extended portability only 14 pounds and added capacity from 230 volt input.The Schumacher 90250 is a well-balanced match of components to offer excellent performance on a full range of every day uses
- Features infinite output control for precise cutting and contact type arc starting - Infinite amp selection from 10-30 amps allows optimum cut characteristicsWith included tips, weld up to 1/4 and cut up to 1/2. With optional tips, weld up to 1-1/4 and cut to 6
- Pilot arc design allows non-continuous cutting (grates, chain link, expanded metal) without retriggeringIncludes welding torch, cutting attachment, cutting tip (#0), 3 welding tips (#0,#2,#4), heating tip, oxygen and acetylene regulators, goggles, spark lighter, and 25-ft. gas hose.
- Built-in air regulator and filter - Digital control panel and diagnostic LEDs - 20 foot plasma torch, 15 foot ground cable, and 10 foot power cordPacked in convenient plastic storage case - Components are Victor compatible - UL Approved
- Non- high frequency arc start - Includes ground cable and clamp, 20 foot torch, adjustable air regulator and spare consumables
Check price and buy Schumacher Turbo 145 MIG/Flux Welder - 120 Volt at Amazon.com |
|
|
|
Schumacher 130 Amp MIG Welder |
- The Schumacher 92035 is an inverter based cutter with cutting capacity of up to 5/16 materials. Inverter design allows extended portability only 14 pounds and added capacity from 230 volt input.The Schumacher 90250 is a well-balanced match of components to offer excellent performance on a full range of every day usesThe Schumacher 93130 has all the performance features as the Schumacher 93100 but with added power from 230 volt input.
- Features infinite output control for precise cutting and contact type arc starting - Infinite amp selection from 10-30 amps allows optimum cut characteristicsWith included tips, weld up to 1/4 and cut up to 1/2. With optional tips, weld up to 1-1/4 and cut to 6Comes complete with 6 foot ground cable and MIG gun, sample spool of .024 steel welding wire, extra contact tips and nozzl
- Pilot arc design allows non-continuous cutting (grates, chain link, expanded metal) without retriggeringIncludes welding torch, cutting attachment, cutting tip (#0), 3 welding tips (#0,#2,#4), heating tip, oxygen and acetylene regulators, goggles, spark lighter, and 25-ft. gas hose.es, dual-gauge gas regulator, and welding mask.
- Built-in air regulator and filter - Digital control panel and diagnostic LEDs - 20 foot plasma torch, 15 foot ground cable, and 10 foot power cordPacked in convenient plastic storage case - Components are Victor compatible - UL ApprovedFour heat settings - Cold wire design no false arcs - Handles solid MIG (with shielding gas) or flux cored welding wires. Easy polarity change terminals under hood
- Non- high frequency arc start - Includes ground cable and clamp, 20 foot torch, adjustable air regulator and spare consumablesQuick set drive tensioning system toggle release to maintain optimum tension when changing wire spools - Twin spindles to hold two different spools simultaneously
- Saves time when changing wire types. - 8 foot power cord (customer supplied plug).
Check price and buy Schumacher 130 Amp MIG Welder at Amazon.com |
|
|
|
Schumacher 150 Amp AC/DC Inverter Stick Welder with TIG Torch |
- The Schumacher 92035 is an inverter based cutter with cutting capacity of up to 5/16 materials. Inverter design allows extended portability only 14 pounds and added capacity from 230 volt input.The Schumacher 90250 is a well-balanced match of components to offer excellent performance on a full range of every day usesThe Schumacher 93130 has all the performance features as the Schumacher 93100 but with added power from 230 volt input.The Schumacher 94210 is an inverter based AC/DC stick and TIG welder. It is capable of using welding electrodes up to 5/32. It also is capable of TIG welding on AC or DC for aluminum, stainless, and mild steel.
- Features infinite output control for precise cutting and contact type arc starting - Infinite amp selection from 10-30 amps allows optimum cut characteristicsWith included tips, weld up to 1/4 and cut up to 1/2. With optional tips, weld up to 1-1/4 and cut to 6Comes complete with 6 foot ground cable and MIG gun, sample spool of .024 steel welding wire, extra contact tips and nozzlInfinite amp selection from 5-150 amps. - Selector switch for stick or TIG, AC or DC - Built-in hot start and anti-stick feature for stick welding
- Pilot arc design allows non-continuous cutting (grates, chain link, expanded metal) without retriggeringIncludes welding torch, cutting attachment, cutting tip (#0), 3 welding tips (#0,#2,#4), heating tip, oxygen and acetylene regulators, goggles, spark lighter, and 25-ft. gas hose.es, dual-gauge gas regulator, and welding mask.Square wave output, wave form adjustment, pulse control - HF start TIG eliminates need to contact material - eliminates tungsten contamination
- Built-in air regulator and filter - Digital control panel and diagnostic LEDs - 20 foot plasma torch, 15 foot ground cable, and 10 foot power cordPacked in convenient plastic storage case - Components are Victor compatible - UL ApprovedFour heat settings - Cold wire design no false arcs - Handles solid MIG (with shielding gas) or flux cored welding wires. Easy polarity change terminals under hoodGas pre- and post flow time control - Welding down slope control (crater fill) - Remote control interface for foot control - Easy polarity change on front of unit -
- Non- high frequency arc start - Includes ground cable and clamp, 20 foot torch, adjustable air regulator and spare consumablesQuick set drive tensioning system toggle release to maintain optimum tension when changing wire spools - Twin spindles to hold two different spools simultaneouslyLow weight for mobility weighs under 45 lbs. - 8 foot power cord with 230V plug - Includes TIG torch with trigger (17V) and spare parts, electrode cable with clamp, ground cable with clamp, and dual-gauge adjustable gas regulator
- Saves time when changing wire types. - 8 foot power cord (customer supplied plug).
Check price and buy Schumacher 150 Amp AC/DC Inverter Stick Welder with TIG Torch at Amazon.com |
|
|
|
Schumacher 230 Amp AC Arc Welder - Infinite Amp Control |
- The Schumacher 92035 is an inverter based cutter with cutting capacity of up to 5/16 materials. Inverter design allows extended portability only 14 pounds and added capacity from 230 volt input.The Schumacher 90250 is a well-balanced match of components to offer excellent performance on a full range of every day usesThe Schumacher 93130 has all the performance features as the Schumacher 93100 but with added power from 230 volt input.The Schumacher 94210 is an inverter based AC/DC stick and TIG welder. It is capable of using welding electrodes up to 5/32. It also is capable of TIG welding on AC or DC for aluminum, stainless, and mild steel.The Schumacher 94230 is the industry standard of stick welding for general repairs and fabrication around the shop or garage
- Features infinite output control for precise cutting and contact type arc starting - Infinite amp selection from 10-30 amps allows optimum cut characteristicsWith included tips, weld up to 1/4 and cut up to 1/2. With optional tips, weld up to 1-1/4 and cut to 6Comes complete with 6 foot ground cable and MIG gun, sample spool of .024 steel welding wire, extra contact tips and nozzlInfinite amp selection from 5-150 amps. - Selector switch for stick or TIG, AC or DC - Built-in hot start and anti-stick feature for stick weldingComes complete with 6 foot ground and 8 foot electrode cable, sample welding electrodes, electrode holder and ground clamp, and welding mask and includes wheel kit.
- Pilot arc design allows non-continuous cutting (grates, chain link, expanded metal) without retriggeringIncludes welding torch, cutting attachment, cutting tip (#0), 3 welding tips (#0,#2,#4), heating tip, oxygen and acetylene regulators, goggles, spark lighter, and 25-ft. gas hose.es, dual-gauge gas regulator, and welding mask.Square wave output, wave form adjustment, pulse control - HF start TIG eliminates need to contact material - eliminates tungsten contaminationInfinite heat selection feature pick the exact amperage needed for the job - Horizontal desi
- Built-in air regulator and filter - Digital control panel and diagnostic LEDs - 20 foot plasma torch, 15 foot ground cable, and 10 foot power cordPacked in convenient plastic storage case - Components are Victor compatible - UL ApprovedFour heat settings - Cold wire design no false arcs - Handles solid MIG (with shielding gas) or flux cored welding wires. Easy polarity change terminals under hoodGas pre- and post flow time control - Welding down slope control (crater fill) - Remote control interface for foot control - Easy polarity change on front of unit -gn stores easily under workbenches
- Non- high frequency arc start - Includes ground cable and clamp, 20 foot torch, adjustable air regulator and spare consumablesQuick set drive tensioning system toggle release to maintain optimum tension when changing wire spools - Twin spindles to hold two different spools simultaneouslyLow weight for mobility weighs under 45 lbs. - 8 foot power cord with 230V plug - Includes TIG torch with trigger (17V) and spare parts, electrode cable with clamp, ground cable with clamp, and dual-gauge adjustable gas regulatorWheel kit includes convenient handle with cord wrap feature
- Saves time when changing wire types. - 8 foot power cord (customer supplied plug).Handles mild steel electrodes from 1/16-in. up to 5/32-in. - 8 foot power cord with 230 volt 50 amp plug
Check price and buy Schumacher 230 Amp AC Arc Welder - Infinite Amp Control at Amazon.com |
|
|
|
Schumacher 230/140 Amp AC/DC Arc Welder |
- The Schumacher 92035 is an inverter based cutter with cutting capacity of up to 5/16 materials. Inverter design allows extended portability only 14 pounds and added capacity from 230 volt input.The Schumacher 90250 is a well-balanced match of components to offer excellent performance on a full range of every day usesThe Schumacher 93130 has all the performance features as the Schumacher 93100 but with added power from 230 volt input.The Schumacher 94210 is an inverter based AC/DC stick and TIG welder. It is capable of using welding electrodes up to 5/32. It also is capable of TIG welding on AC or DC for aluminum, stainless, and mild steel.The Schumacher 94230 is the industry standard of stick welding for general repairs and fabrication around the shop or garageDC output aids in welding with hard to start electrodes, eases overhead and out-of-position welding, and offers lower spatter smoother welds
- Features infinite output control for precise cutting and contact type arc starting - Infinite amp selection from 10-30 amps allows optimum cut characteristicsWith included tips, weld up to 1/4 and cut up to 1/2. With optional tips, weld up to 1-1/4 and cut to 6Comes complete with 6 foot ground cable and MIG gun, sample spool of .024 steel welding wire, extra contact tips and nozzlInfinite amp selection from 5-150 amps. - Selector switch for stick or TIG, AC or DC - Built-in hot start and anti-stick feature for stick weldingComes complete with 6 foot ground and 8 foot electrode cable, sample welding electrodes, electrode holder and ground clamp, and welding mask and includes wheel kit.Comes complete with 6 foot ground and 8 foot electrode cable, sam
- Pilot arc design allows non-continuous cutting (grates, chain link, expanded metal) without retriggeringIncludes welding torch, cutting attachment, cutting tip (#0), 3 welding tips (#0,#2,#4), heating tip, oxygen and acetylene regulators, goggles, spark lighter, and 25-ft. gas hose.es, dual-gauge gas regulator, and welding mask.Square wave output, wave form adjustment, pulse control - HF start TIG eliminates need to contact material - eliminates tungsten contaminationInfinite heat selection feature pick the exact amperage needed for the job - Horizontal desiple welding electrodes, electrode holder and ground clamp, and welding mask and includes wheel kit.
- Built-in air regulator and filter - Digital control panel and diagnostic LEDs - 20 foot plasma torch, 15 foot ground cable, and 10 foot power cordPacked in convenient plastic storage case - Components are Victor compatible - UL ApprovedFour heat settings - Cold wire design no false arcs - Handles solid MIG (with shielding gas) or flux cored welding wires. Easy polarity change terminals under hoodGas pre- and post flow time control - Welding down slope control (crater fill) - Remote control interface for foot control - Easy polarity change on front of unit -gn stores easily under workbenchesInfinite heat selection feature pick the exact amperage needed for the job - Horizontal design stores easily under workbenches
- Non- high frequency arc start - Includes ground cable and clamp, 20 foot torch, adjustable air regulator and spare consumablesQuick set drive tensioning system toggle release to maintain optimum tension when changing wire spools - Twin spindles to hold two different spools simultaneouslyLow weight for mobility weighs under 45 lbs. - 8 foot power cord with 230V plug - Includes TIG torch with trigger (17V) and spare parts, electrode cable with clamp, ground cable with clamp, and dual-gauge adjustable gas regulatorWheel kit includes convenient handle with cord wrap featureWheel kit includes convenient handle with cord wrap feature - Handles mild steel electrodes from 1/16-in. up to 5/32-in. - 8 foot power cord with 230 volt 50 amp plug
- Saves time when changing wire types. - 8 foot power cord (customer supplied plug).Handles mild steel electrodes from 1/16-in. up to 5/32-in. - 8 foot power cord with 230 volt 50 amp plug
Check price and buy Schumacher 230/140 Amp AC/DC Arc Welder at Amazon.com |
|
|
|
Schumacher 80 Amp DC Inverter Stick Welder with TIG Torch |
- The Schumacher 92035 is an inverter based cutter with cutting capacity of up to 5/16 materials. Inverter design allows extended portability only 14 pounds and added capacity from 230 volt input.The Schumacher 90250 is a well-balanced match of components to offer excellent performance on a full range of every day usesThe Schumacher 93130 has all the performance features as the Schumacher 93100 but with added power from 230 volt input.The Schumacher 94210 is an inverter based AC/DC stick and TIG welder. It is capable of using welding electrodes up to 5/32. It also is capable of TIG welding on AC or DC for aluminum, stainless, and mild steel.The Schumacher 94230 is the industry standard of stick welding for general repairs and fabrication around the shop or garageDC output aids in welding with hard to start electrodes, eases overhead and out-of-position welding, and offers lower spatter smoother weldsThe Schumacher 94180 is an inverter based DC stick welder capable of using most welding electrodes up to 3/32-in. Also capable of working with a TIG torch to TIG weld stainless and mild steel
- Features infinite output control for precise cutting and contact type arc starting - Infinite amp selection from 10-30 amps allows optimum cut characteristicsWith included tips, weld up to 1/4 and cut up to 1/2. With optional tips, weld up to 1-1/4 and cut to 6Comes complete with 6 foot ground cable and MIG gun, sample spool of .024 steel welding wire, extra contact tips and nozzlInfinite amp selection from 5-150 amps. - Selector switch for stick or TIG, AC or DC - Built-in hot start and anti-stick feature for stick weldingComes complete with 6 foot ground and 8 foot electrode cable, sample welding electrodes, electrode holder and ground clamp, and welding mask and includes wheel kit.Comes complete with 6 foot ground and 8 foot electrode cable, samInfinite amp selection from 5-85 amps - Built-in hot start and anti-stick feature for stick welding - Easy polarity change on front of unit
- Pilot arc design allows non-continuous cutting (grates, chain link, expanded metal) without retriggeringIncludes welding torch, cutting attachment, cutting tip (#0), 3 welding tips (#0,#2,#4), heating tip, oxygen and acetylene regulators, goggles, spark lighter, and 25-ft. gas hose.es, dual-gauge gas regulator, and welding mask.Square wave output, wave form adjustment, pulse control - HF start TIG eliminates need to contact material - eliminates tungsten contaminationInfinite heat selection feature pick the exact amperage needed for the job - Horizontal desiple welding electrodes, electrode holder and ground clamp, and welding mask and includes wheel kit.Low weight for mobility weighs under 10 lbs. - 8 foot power cord with 120 volt 15 amp plug
- Built-in air regulator and filter - Digital control panel and diagnostic LEDs - 20 foot plasma torch, 15 foot ground cable, and 10 foot power cordPacked in convenient plastic storage case - Components are Victor compatible - UL ApprovedFour heat settings - Cold wire design no false arcs - Handles solid MIG (with shielding gas) or flux cored welding wires. Easy polarity change terminals under hoodGas pre- and post flow time control - Welding down slope control (crater fill) - Remote control interface for foot control - Easy polarity change on front of unit -gn stores easily under workbenchesInfinite heat selection feature pick the exact amperage needed for the job - Horizontal design stores easily under workbenchesIncludes electrode cable and clamp, ground cable and clamp, sample welding electrodes, welding shield, chipping hammer, and molded storage/carry case
- Non- high frequency arc start - Includes ground cable and clamp, 20 foot torch, adjustable air regulator and spare consumablesQuick set drive tensioning system toggle release to maintain optimum tension when changing wire spools - Twin spindles to hold two different spools simultaneouslyLow weight for mobility weighs under 45 lbs. - 8 foot power cord with 230V plug - Includes TIG torch with trigger (17V) and spare parts, electrode cable with clamp, ground cable with clamp, and dual-gauge adjustable gas regulatorWheel kit includes convenient handle with cord wrap featureWheel kit includes convenient handle with cord wrap feature - Handles mild steel electrodes from 1/16-in. up to 5/32-in. - 8 foot power cord with 230 volt 50 amp plug
- Saves time when changing wire types. - 8 foot power cord (customer supplied plug).Handles mild steel electrodes from 1/16-in. up to 5/32-in. - 8 foot power cord with 230 volt 50 amp plug
Check price and buy Schumacher 80 Amp DC Inverter Stick Welder with TIG Torch at Amazon.com |
|
|
|
Schumacher 90 Amp DC Inverter Stick Welder with TIG Torch |
- The Schumacher 92035 is an inverter based cutter with cutting capacity of up to 5/16 materials. Inverter design allows extended portability only 14 pounds and added capacity from 230 volt input.The Schumacher 90250 is a well-balanced match of components to offer excellent performance on a full range of every day usesThe Schumacher 93130 has all the performance features as the Schumacher 93100 but with added power from 230 volt input.The Schumacher 94210 is an inverter based AC/DC stick and TIG welder. It is capable of using welding electrodes up to 5/32. It also is capable of TIG welding on AC or DC for aluminum, stainless, and mild steel.The Schumacher 94230 is the industry standard of stick welding for general repairs and fabrication around the shop or garageDC output aids in welding with hard to start electrodes, eases overhead and out-of-position welding, and offers lower spatter smoother weldsThe Schumacher 94180 is an inverter based DC stick welder capable of using most welding electrodes up to 3/32-in. Also capable of working with a TIG torch to TIG weld stainless and mild steel
- Features infinite output control for precise cutting and contact type arc starting - Infinite amp selection from 10-30 amps allows optimum cut characteristicsWith included tips, weld up to 1/4 and cut up to 1/2. With optional tips, weld up to 1-1/4 and cut to 6Comes complete with 6 foot ground cable and MIG gun, sample spool of .024 steel welding wire, extra contact tips and nozzlInfinite amp selection from 5-150 amps. - Selector switch for stick or TIG, AC or DC - Built-in hot start and anti-stick feature for stick weldingComes complete with 6 foot ground and 8 foot electrode cable, sample welding electrodes, electrode holder and ground clamp, and welding mask and includes wheel kit.Comes complete with 6 foot ground and 8 foot electrode cable, samInfinite amp selection from 5-85 amps - Built-in hot start and anti-stick feature for stick welding - Easy polarity change on front of unit
- Pilot arc design allows non-continuous cutting (grates, chain link, expanded metal) without retriggeringIncludes welding torch, cutting attachment, cutting tip (#0), 3 welding tips (#0,#2,#4), heating tip, oxygen and acetylene regulators, goggles, spark lighter, and 25-ft. gas hose.es, dual-gauge gas regulator, and welding mask.Square wave output, wave form adjustment, pulse control - HF start TIG eliminates need to contact material - eliminates tungsten contaminationInfinite heat selection feature pick the exact amperage needed for the job - Horizontal desiple welding electrodes, electrode holder and ground clamp, and welding mask and includes wheel kit.Low weight for mobility weighs under 10 lbs. - 8 foot power cord with 120 volt 15 amp plug
- Built-in air regulator and filter - Digital control panel and diagnostic LEDs - 20 foot plasma torch, 15 foot ground cable, and 10 foot power cordPacked in convenient plastic storage case - Components are Victor compatible - UL ApprovedFour heat settings - Cold wire design no false arcs - Handles solid MIG (with shielding gas) or flux cored welding wires. Easy polarity change terminals under hoodGas pre- and post flow time control - Welding down slope control (crater fill) - Remote control interface for foot control - Easy polarity change on front of unit -gn stores easily under workbenchesInfinite heat selection feature pick the exact amperage needed for the job - Horizontal design stores easily under workbenchesIncludes electrode cable and clamp, ground cable and clamp, sample welding electrodes, welding shield, chipping hammer, and molded storage/carry case
- Non- high frequency arc start - Includes ground cable and clamp, 20 foot torch, adjustable air regulator and spare consumablesQuick set drive tensioning system toggle release to maintain optimum tension when changing wire spools - Twin spindles to hold two different spools simultaneouslyLow weight for mobility weighs under 45 lbs. - 8 foot power cord with 230V plug - Includes TIG torch with trigger (17V) and spare parts, electrode cable with clamp, ground cable with clamp, and dual-gauge adjustable gas regulatorWheel kit includes convenient handle with cord wrap featureWheel kit includes convenient handle with cord wrap feature - Handles mild steel electrodes from 1/16-in. up to 5/32-in. - 8 foot power cord with 230 volt 50 amp plug
- Saves time when changing wire types. - 8 foot power cord (customer supplied plug).Handles mild steel electrodes from 1/16-in. up to 5/32-in. - 8 foot power cord with 230 volt 50 amp plug
Check price and buy Schumacher 90 Amp DC Inverter Stick Welder with TIG Torch at Amazon.com |
|
|
|
