|
|
Neiko Titanium Step Drill Bit - 1/4" to 1-3/8" in 1/8" Increments, 10 Steps |
- For drilling holes in thin material such as steel, stainless steel, copper, aluminum, or plastic
- 3/8" Shank with 3 flats to prevent slippage
- Step Sizes: 1/4, 3/8, 1/2, 5/8, 3/4, 7/8, 1, 1-1/8, 1-1/4, 1-3/8-inch
- Double flute for easy control
- Self-starting, no walking and center punch is not required
Check price and buy Neiko Titanium Step Drill Bit - 1/4" to 1-3/8" in 1/8" Increments, 10 Steps at Amazon.com |
|
|
|
Irwin Industrial Tools 10228 Unibit 228 Step Drill Bit Set 4-Piece |
- For drilling holes in thin material such as steel, stainless steel, copper, aluminum, or plasticSingle-flute cutting edge for greater control through steps
- 3/8" Shank with 3 flats to prevent slippage3 Flatted shank prevents slipping in drill chuck
- Step Sizes: 1/4, 3/8, 1/2, 5/8, 3/4, 7/8, 1, 1-1/8, 1-1/4, 1-3/8-inchNon-skid self-starting tip eliminates skidding and the need for center punching.
- Double flute for easy controlAvailable in fractional and metric sizes
- Self-starting, no walking and center punch is not requiredAlso available with titanium nitride coating for longer life
Check price and buy Irwin Industrial Tools 10228 Unibit 228 Step Drill Bit Set 4-Piece at Amazon.com |
|
|
|
Irwin Industrial Tools 10502 Unibit 502 Step Drill Bit Set, 3-Piece |
- For drilling holes in thin material such as steel, stainless steel, copper, aluminum, or plasticSingle-flute cutting edge for greater control through stepsSingle-flute cutting edge for greater control through steps
- 3/8" Shank with 3 flats to prevent slippage3 Flatted shank prevents slipping in drill chuck3 Flatted shank prevents slipping in drill chuck
- Step Sizes: 1/4, 3/8, 1/2, 5/8, 3/4, 7/8, 1, 1-1/8, 1-1/4, 1-3/8-inchNon-skid self-starting tip eliminates skidding and the need for center punching.Non-skid self-starting tip eliminates skidding and the need for center punching.
- Double flute for easy controlAvailable in fractional and metric sizesFeatures an easy-to-sharpen, self-starting tip that eliminates skidding
- Self-starting, no walking and center punch is not requiredAlso available with titanium nitride coating for longer lifeFull lifetime warranty
Check price and buy Irwin Industrial Tools 10502 Unibit 502 Step Drill Bit Set, 3-Piece at Amazon.com |
|
|
|
Irwin Industrial Tools 3018008 Unibit TiN TurboMax Pro Drill Bit Set, 9-Piece |
- For drilling holes in thin material such as steel, stainless steel, copper, aluminum, or plasticSingle-flute cutting edge for greater control through stepsSingle-flute cutting edge for greater control through stepsTitanium Nitride Coating extends cutting edge life up to 6x
- 3/8" Shank with 3 flats to prevent slippage3 Flatted shank prevents slipping in drill chuck3 Flatted shank prevents slipping in drill chuckTurboMax tip starts up to 10x faster
- Step Sizes: 1/4, 3/8, 1/2, 5/8, 3/4, 7/8, 1, 1-1/8, 1-1/4, 1-3/8-inchNon-skid self-starting tip eliminates skidding and the need for center punching.Non-skid self-starting tip eliminates skidding and the need for center punching.
- Double flute for easy controlAvailable in fractional and metric sizesFeatures an easy-to-sharpen, self-starting tip that eliminates skidding
- Self-starting, no walking and center punch is not requiredAlso available with titanium nitride coating for longer lifeFull lifetime warranty
Check price and buy Irwin Industrial Tools 3018008 Unibit TiN TurboMax Pro Drill Bit Set, 9-Piece at Amazon.com |
|
|
|
Irwin Industrial Tools 10225 Unibit General Purpose Step Drill Bit Set, 4-Piece |
- For drilling holes in thin material such as steel, stainless steel, copper, aluminum, or plasticSingle-flute cutting edge for greater control through stepsSingle-flute cutting edge for greater control through stepsTitanium Nitride Coating extends cutting edge life up to 6xSingle-flute cutting edge for greater control through steps
- 3/8" Shank with 3 flats to prevent slippage3 Flatted shank prevents slipping in drill chuck3 Flatted shank prevents slipping in drill chuckTurboMax tip starts up to 10x faster3 Flatted shank prevents slipping in drill chuck
- Step Sizes: 1/4, 3/8, 1/2, 5/8, 3/4, 7/8, 1, 1-1/8, 1-1/4, 1-3/8-inchNon-skid self-starting tip eliminates skidding and the need for center punching.Non-skid self-starting tip eliminates skidding and the need for center punching.Non-skid self-starting tip eliminates skidding and the need for center punching.
- Double flute for easy controlAvailable in fractional and metric sizesFeatures an easy-to-sharpen, self-starting tip that eliminates skidding3 flatted shank
- Self-starting, no walking and center punch is not requiredAlso available with titanium nitride coating for longer lifeFull lifetime warrantyFull lifetime warranty
Check price and buy Irwin Industrial Tools 10225 Unibit General Purpose Step Drill Bit Set, 4-Piece at Amazon.com |
|
|
|
Greenlee 30008 Multi-Hole Step Bit, 1-1/8" |
- For drilling holes in thin material such as steel, stainless steel, copper, aluminum, or plasticSingle-flute cutting edge for greater control through stepsSingle-flute cutting edge for greater control through stepsTitanium Nitride Coating extends cutting edge life up to 6xSingle-flute cutting edge for greater control through stepsUnique split tip design penetrates through steel faster
- 3/8" Shank with 3 flats to prevent slippage3 Flatted shank prevents slipping in drill chuck3 Flatted shank prevents slipping in drill chuckTurboMax tip starts up to 10x faster3 Flatted shank prevents slipping in drill chuckResists walking or skidding
- Step Sizes: 1/4, 3/8, 1/2, 5/8, 3/4, 7/8, 1, 1-1/8, 1-1/4, 1-3/8-inchNon-skid self-starting tip eliminates skidding and the need for center punching.Non-skid self-starting tip eliminates skidding and the need for center punching.Non-skid self-starting tip eliminates skidding and the need for center punching.Balanced, double-flute construction requires less pressure
- Double flute for easy controlAvailable in fractional and metric sizesFeatures an easy-to-sharpen, self-starting tip that eliminates skidding3 flatted shankHole Sizes: From 1/8-Inch through 1-3/8-Inch (3.2 - 34.9-mm)
- Self-starting, no walking and center punch is not requiredAlso available with titanium nitride coating for longer lifeFull lifetime warrantyFull lifetime warrantyCapacity: cut up through 3/8-Inch (9.5-mm) mild steel, copper, brass, aluminum, wood, plastic and laminates
Check price and buy Greenlee 30008 Multi-Hole Step Bit, 1-1/8" at Amazon.com |
|
|
|
Trademark Tools 75-TZ5013 Hawk Step Titanium Coated HSS High Speed Steel 3 Piece Unibit Set |
- For drilling holes in thin material such as steel, stainless steel, copper, aluminum, or plasticSingle-flute cutting edge for greater control through stepsSingle-flute cutting edge for greater control through stepsTitanium Nitride Coating extends cutting edge life up to 6xSingle-flute cutting edge for greater control through stepsUnique split tip design penetrates through steel fasterAutomatically De-burrs holes as you drill
- 3/8" Shank with 3 flats to prevent slippage3 Flatted shank prevents slipping in drill chuck3 Flatted shank prevents slipping in drill chuckTurboMax tip starts up to 10x faster3 Flatted shank prevents slipping in drill chuckResists walking or skiddingBit #1 hole range is 3/16-Inch - 1/2-Inch in 6 size steps (measured 3.25 inches in total length)
- Step Sizes: 1/4, 3/8, 1/2, 5/8, 3/4, 7/8, 1, 1-1/8, 1-1/4, 1-3/8-inchNon-skid self-starting tip eliminates skidding and the need for center punching.Non-skid self-starting tip eliminates skidding and the need for center punching.Non-skid self-starting tip eliminates skidding and the need for center punching.Balanced, double-flute construction requires less pressureBit #2 hole range is 1/4-Inch - 3/4-Inch in 9 size steps (measured 2.75 inches in total length)
- Double flute for easy controlAvailable in fractional and metric sizesFeatures an easy-to-sharpen, self-starting tip that eliminates skidding3 flatted shankHole Sizes: From 1/8-Inch through 1-3/8-Inch (3.2 - 34.9-mm)Bit #3 hole range is 1/8-Inch - 1/2-Inch in 13 size steps (measured 2.875 inches in total length)
- Self-starting, no walking and center punch is not requiredAlso available with titanium nitride coating for longer lifeFull lifetime warrantyFull lifetime warrantyCapacity: cut up through 3/8-Inch (9.5-mm) mild steel, copper, brass, aluminum, wood, plastic and laminatesQuick Change 1/4-Inch hex shank
Check price and buy Trademark Tools 75-TZ5013 Hawk Step Titanium Coated HSS High Speed Steel 3 Piece Unibit Set at Amazon.com |
|
|
|
Irwin Industrial Tools 10502CB Unibit 502 Drill Bit Set, 3-Piece |
- For drilling holes in thin material such as steel, stainless steel, copper, aluminum, or plasticSingle-flute cutting edge for greater control through stepsSingle-flute cutting edge for greater control through stepsTitanium Nitride Coating extends cutting edge life up to 6xSingle-flute cutting edge for greater control through stepsUnique split tip design penetrates through steel fasterAutomatically De-burrs holes as you drillSingle-flute cutting edge for greater control through steps
- 3/8" Shank with 3 flats to prevent slippage3 Flatted shank prevents slipping in drill chuck3 Flatted shank prevents slipping in drill chuckTurboMax tip starts up to 10x faster3 Flatted shank prevents slipping in drill chuckResists walking or skiddingBit #1 hole range is 3/16-Inch - 1/2-Inch in 6 size steps (measured 3.25 inches in total length)3 Flatted shank prevents slipping in drill chuck
- Step Sizes: 1/4, 3/8, 1/2, 5/8, 3/4, 7/8, 1, 1-1/8, 1-1/4, 1-3/8-inchNon-skid self-starting tip eliminates skidding and the need for center punching.Non-skid self-starting tip eliminates skidding and the need for center punching.Non-skid self-starting tip eliminates skidding and the need for center punching.Balanced, double-flute construction requires less pressureBit #2 hole range is 1/4-Inch - 3/4-Inch in 9 size steps (measured 2.75 inches in total length)Non-skid self-starting tip eliminates skidding and the need for center punching.
- Double flute for easy controlAvailable in fractional and metric sizesFeatures an easy-to-sharpen, self-starting tip that eliminates skidding3 flatted shankHole Sizes: From 1/8-Inch through 1-3/8-Inch (3.2 - 34.9-mm)Bit #3 hole range is 1/8-Inch - 1/2-Inch in 13 size steps (measured 2.875 inches in total length)Laser marked sizes
- Self-starting, no walking and center punch is not requiredAlso available with titanium nitride coating for longer lifeFull lifetime warrantyFull lifetime warrantyCapacity: cut up through 3/8-Inch (9.5-mm) mild steel, copper, brass, aluminum, wood, plastic and laminatesQuick Change 1/4-Inch hex shank3-flatted shank
Check price and buy Irwin Industrial Tools 10502CB Unibit 502 Drill Bit Set, 3-Piece at Amazon.com |
|
|
|
3 Piece Step Bit Set |
- For drilling holes in thin material such as steel, stainless steel, copper, aluminum, or plasticSingle-flute cutting edge for greater control through stepsSingle-flute cutting edge for greater control through stepsTitanium Nitride Coating extends cutting edge life up to 6xSingle-flute cutting edge for greater control through stepsUnique split tip design penetrates through steel fasterAutomatically De-burrs holes as you drillSingle-flute cutting edge for greater control through stepsDrill up to 28 hole sizes
- 3/8" Shank with 3 flats to prevent slippage3 Flatted shank prevents slipping in drill chuck3 Flatted shank prevents slipping in drill chuckTurboMax tip starts up to 10x faster3 Flatted shank prevents slipping in drill chuckResists walking or skiddingBit #1 hole range is 3/16-Inch - 1/2-Inch in 6 size steps (measured 3.25 inches in total length)3 Flatted shank prevents slipping in drill chuckQuick change 1/4" hex shank
- Step Sizes: 1/4, 3/8, 1/2, 5/8, 3/4, 7/8, 1, 1-1/8, 1-1/4, 1-3/8-inchNon-skid self-starting tip eliminates skidding and the need for center punching.Non-skid self-starting tip eliminates skidding and the need for center punching.Non-skid self-starting tip eliminates skidding and the need for center punching.Balanced, double-flute construction requires less pressureBit #2 hole range is 1/4-Inch - 3/4-Inch in 9 size steps (measured 2.75 inches in total length)Non-skid self-starting tip eliminates skidding and the need for center punching.Titanium Nitride Coated M2 High Speed Steel
- Double flute for easy controlAvailable in fractional and metric sizesFeatures an easy-to-sharpen, self-starting tip that eliminates skidding3 flatted shankHole Sizes: From 1/8-Inch through 1-3/8-Inch (3.2 - 34.9-mm)Bit #3 hole range is 1/8-Inch - 1/2-Inch in 13 size steps (measured 2.875 inches in total length)Laser marked sizes
- Self-starting, no walking and center punch is not requiredAlso available with titanium nitride coating for longer lifeFull lifetime warrantyFull lifetime warrantyCapacity: cut up through 3/8-Inch (9.5-mm) mild steel, copper, brass, aluminum, wood, plastic and laminatesQuick Change 1/4-Inch hex shank3-flatted shank
Check price and buy 3 Piece Step Bit Set at Amazon.com |
|
|
|
Irwin Industrial Tools 15502 Unibit 502T Titanium Nitride Coated Step Drill Bit Set with Nylon Pouch, 3-Piece |
- For drilling holes in thin material such as steel, stainless steel, copper, aluminum, or plasticSingle-flute cutting edge for greater control through stepsSingle-flute cutting edge for greater control through stepsTitanium Nitride Coating extends cutting edge life up to 6xSingle-flute cutting edge for greater control through stepsUnique split tip design penetrates through steel fasterAutomatically De-burrs holes as you drillSingle-flute cutting edge for greater control through stepsDrill up to 28 hole sizesSingle-flute cutting edge for greater control through steps
- 3/8" Shank with 3 flats to prevent slippage3 Flatted shank prevents slipping in drill chuck3 Flatted shank prevents slipping in drill chuckTurboMax tip starts up to 10x faster3 Flatted shank prevents slipping in drill chuckResists walking or skiddingBit #1 hole range is 3/16-Inch - 1/2-Inch in 6 size steps (measured 3.25 inches in total length)3 Flatted shank prevents slipping in drill chuckQuick change 1/4" hex shank3 Flatted shank prevents slipping in drill chuck
- Step Sizes: 1/4, 3/8, 1/2, 5/8, 3/4, 7/8, 1, 1-1/8, 1-1/4, 1-3/8-inchNon-skid self-starting tip eliminates skidding and the need for center punching.Non-skid self-starting tip eliminates skidding and the need for center punching.Non-skid self-starting tip eliminates skidding and the need for center punching.Balanced, double-flute construction requires less pressureBit #2 hole range is 1/4-Inch - 3/4-Inch in 9 size steps (measured 2.75 inches in total length)Non-skid self-starting tip eliminates skidding and the need for center punching.Titanium Nitride Coated M2 High Speed SteelNon-skid self-starting tip eliminates skidding and the need for center punching.
- Double flute for easy controlAvailable in fractional and metric sizesFeatures an easy-to-sharpen, self-starting tip that eliminates skidding3 flatted shankHole Sizes: From 1/8-Inch through 1-3/8-Inch (3.2 - 34.9-mm)Bit #3 hole range is 1/8-Inch - 1/2-Inch in 13 size steps (measured 2.875 inches in total length)Laser marked sizesConvenient storage case
- Self-starting, no walking and center punch is not requiredAlso available with titanium nitride coating for longer lifeFull lifetime warrantyFull lifetime warrantyCapacity: cut up through 3/8-Inch (9.5-mm) mild steel, copper, brass, aluminum, wood, plastic and laminatesQuick Change 1/4-Inch hex shank3-flatted shankLimited lifetime manufacturer's warranty
Check price and buy Irwin Industrial Tools 15502 Unibit 502T Titanium Nitride Coated Step Drill Bit Set with Nylon Pouch, 3-Piece at Amazon.com |
|
|
|